Search results

thanks man

I was just about to ask you that. So, the FRTP has two setting up front and three in the rear, check! Is my logic correct in thinking the ends of the SBs are the softest settings?

all this makes perfect sense with how the car feels, much appreciated guys!

should they typically be set similar front and rear or is it good practice for the rear to be a little soft?

I had this suspension installed and am fairly happy with it for street manners. I will track it alot in the fall but have some questions. The car feels a little loose in the rear in turns while the front feels hooked up. The installer said he set the front sway bar to the soft setting and the...

2018 PP suspension with maximum motorsports camber plates installed(cost additional $250 plus install). In excellent shape and they have about 12K miles. PP comes with all you see in the pic: Front strut/spring with camber plates rear spring and shock rear toe links front and rear sway bars...

I would stick to the recommended coolant solution and as far as the tires are concerned. start at 32PSI cold and bleed off if needed. A hot pressure of about 34/35 is ideal. I noticed the tires getting greasy about 37.

Concerning the lemon law, I think it's per state, but my viper was in the shop 46 days and they still didn't buy it back. I do think the buy back is a couple things. 1. The severity of the issue 2. The length of time in the shop

interesting, I was getting wear like this when I was at -1.9 up front but cant imagine it still being like that at -3. I too wonder what Bmac asked.

I went 2.7 based on your experience of it not being to bad on daily tire wear. So, F-3.5 and R-2.0. Sounds like a plan, as always, much appreciated!

I had FRTP suspension and Steeda camber plates installed last week. Before I went to the alignment shop the installer measured the front at -3.25 camber. I settled at -2.7 front and -1.9 rear. I think the max for the rear is -2 without mods. My question is, In a race setup what would the front...

cool info

I just upgraded suspension on my 2018 PP1 and have the stock suspension with Maximum motorsport camber plates installed that I am offering for sale. The suspension has 13K miles on it. This comes with front and rear sway bars too. I prefer this to be a semi local pickup or can meet within a...

I had the shop correct the install and had the alignment done and it drives perfect now. I think it drives better now than it did when new. We'll see how the new camber setting do. :) Thanks for all the help guys!!

I drove it up town yesterday and am noticing a rotating buzz/hum. Sounds like something rubbing the wheel/tire. All I had installed was the FRTP and camber plates. Suggestions? FYI It'll be back in the shop next week to be corrected but want to give them suggestions of what I hear.

The consumer doesn't use their car, do they? The Viper Experience had something similar.

thanks

Nightmare, I notice you don't have the top brace like mine. Could that be it? Edit: Son of a gun, Thats it.

Mine is no wear near that far over. See the pic.

I know something is up but I don't have much to debate with. I know I paid a pricey chunk to have it done.