Search results

the red valve is louddddddd. im running x pipe into roush mufflers and during regular driving its just as loud as the exhaust.. from the inside it's not too bad and its never bothered me. [ame] [ame]

take it in for warranty, they should take care of it.

im running 19x10 et40 and 19x11 et55. looks like it could go out another 5mm both front and rear. i'm running 275 front and barely clears the strut. if i wanted to go 285 i'd put a 5mm in the front, so i guess et35. here's the front with 19x10 with 275s 2017-07-13 19.45.22 by Jae Choi, on...

there is no PID for boost on the car. youd have to hook up a manual gauge or get a boost box and wire it into ngauge.

mine came with an ngauge but with a procharger tune

even with the procharger canned tune youre gonna have to datalog..

DSC_0477 by Jae Choi, on Flickr DSC_0450 by Jae Choi, on Flickr 19x10 +40 19x11 +55 MRR m350s 275 35 front 285 35 rear

DSC_0457 by Jae Choi, on Flickr DSC_0482 by Jae Choi, on Flickr DSC_0477 by Jae Choi, on Flickr

DSC_0477 by Jae Choi, on Flickr

i've been running the base procharger HO kit for about 10k miles now (30k on car) and it's been great so far! installation is straightforward, and the maintenance has been easy. i took a look at some of my recent logs, sitting at idle inbetween heats at the track i have ambient temp as 88F and...

[ame] [ame]

im gonna guess 275 35 and 315 35???

you don't have to leave it plugged in but you should log initially just to make sure that it's running right..

19x10 et35 rear will be pretty flush but front will be sunk in about 7-8mm. When i used to run 25mm spacers on my 19x8.5 this is what it looked like (essentialyl 19x8.5 et17.5). I'd go 9 in the front with a +22, or a 9.5 +30. DSC_0220 by Jae Choi, on Flickr i'm also lowered 1.25 front 1...

some photos from the autox event i went to this weekend. DSC_0479 by Jae Choi, on Flickr DSC_0488 by Jae Choi, on Flickr DSC_0726 by Jae Choi, on Flickr

this is graphite gray.

19x10 et40 275 35 19 19x11 et55 285 35 19 MRR M350s DSC_0007 DSC_0018 DSC_0017 DSC_0029 DSC_0025

DSC_0007 by Jae Choi, on Flickr DSC_0018 by Jae Choi, on Flickr DSC_0017 by Jae Choi, on Flickr DSC_0025 by Jae Choi, on Flickr quick photo shoot after installing a set of m350s

Hey, found these links on ebay. thought i'd share as you're looking at under 600 for a brand new set of the new continentals! not sure if other sizes are available but here's what i bought: 275 35 19...

is there an es9 available in 19x9.5? from all i could tell i saw 18x9.5 that could work with the s550 offsets. wouldnt a 9.5 et22 poke too much on factory alignment?