Search results

I had a white 2020 and added stripes. I think I’m leaning towards the black roof no stripes. Already had a 2011 grabber with white stripes.

I’ve narrowed it down to one of these two. Working with both dealers to see what they are willing to do. I’ve been searching the country for the past few weeks looking at what dealers have coming in. I’d say about 50% if not more of incoming orders to dealers are Brittany Blue. I talked to a...

I’m looking at a 2021 CFTP with 100 miles. It’s a buyback from Ford. Carfax states long block was replaced due to tick and knock in motor. Car still has full factory warranty. What do you guys think the car is worth? They have it listed for 110k. Thanks

Wheels are 20x11 and 20x10. FP advertises 3/4” drop. Mine was a little less but will probably be there once they settle in.

New wheels and FP lowering springs

This was yesterday after filling up and driving conservatively for a little while 68-70 mph 6sp

Email I received today. What was the previous location?

May 17/18 here

Sweet. Thank you that will save me a lot of time. The guys that installed my sub probably knocked it out.

Cleaning under the car today and this fell out from the front passenger side fender well. Tried looking up the part number with no success. Guess I’ll rip the fender liner out and investigate. DG93-F022B53-AB

Another vote for the Caliperfexion studs and the Powerstop pads that almost completely eliminate brake dust. Can’t wait for them to start making the rears.

Sorry they were the correct orientation when I uploaded. Not sure how that happened.

Don’t have IG. These are all I have for now. Will be getting more when it warms up.

Yes Xpel Stealth gives the car a matte finish.

Another vote for full ppf. I went with Xpel Stealth and added stripes from Big Worm Graphix.

When I sent RockAuto an email telling them they sent the wrong rear pads they sent a refund without me returning them. They also said in the email it was basically my fault that I didn’t check to verify the correct part numbers. You may want to email them before you try to return. I also used...

I don’t believe Powerstop is making rear pads yet. RockAuto has the wrong rear pads listed for our cars if that’s where you got them from.

I hauled mine home from the dealer on a uhaul trailer. Had to cut 2x10 boards and let the car sit on those to get the front end over the front stops on the trailer. That was before I installed the splitter but if you had to stack 2 boards I think that would work too. Also raise the front of the...

Thanks for sharing that. It appears you and I are very similar in regards to OCD and wanting everything to be perfect on our cars. On a side note I also had a race red 350 and now have a white 500. I actually used one of your photos as my wallpaper until mine was delivered.

Thanks, that’s a great write-up. I read over it a couple times before I tackled mine even though I’ve lowered several S550’s and was familiar with the process. I was mainly curious about the alignment since I kept the non adjustable strut mounts. I’m assuming the only adjustment an alignment...