Search results

I'm sure some will condemn me - I've put decent camber bolts on my last two Mustangs to get camber back after lowering. I've only put the bolts at the top of the bottom strut mount, but they can be put on top and bottom for more range. A little more difficult for the shop to make adjustments...

They owe you a wheel, an alignment, and possibly a tire (pair of tires if 75% or less tread). Show your "trusted" dealer your cam footage, then ask them do the work and charge it to the idiots that made the work necessary. Also, ask them to inspect the undercarriage for additional damage.

I went with the Injen Evolution mainly because it looks like it belongs in the given space more so than the stock box.

Interesting. Now, does anybody have a clue as to the damper's exact function, and does it actually perform that function?

EP901 Thank you ! ! Yes, that’s it. I bought the blowfish used with no instructions. Having never seen the “damper” before (wasn’t on my ‘17 GT), I was unsure what to do. Thanks again, that cleared thing up nicely.

On my '21, wipers are last in EXTERIOR, and post crash is last in SAFETY/SECURITY. Both are now standard equipment.

Sorry, not the weight I'm having issues with. Mine is held on by the three bolts that hold the transmission mount on. If looking up at the crossmember and tranny mount from the rear, looking forward, you would see the weight instead of the aluminum mount bolted to the tranny tail stock. The...

Thanks for the inputs thus far. Not sure if Ben Calimer removes the weights or the weights are not there. I have looked some more and have yet to find a photo showing the weight. Not sure what purpose the weight on the Focus is for (not a member of that forum - cannot see detail in...

I went to install a used BlowFish shifter bracket on my '21 GT PP and found what appears to be a weight affixed to the three tranny mount bolts that the BlowFish mounts with. If the weight is not present, the three bolts are loosened 1/4", and the bracket slips behind the bolt heads via open...

My son, with 30 years of auto body work, says no wait is necessary. This is for factory paint due to manufacturer "quick" curing using heat lamps and hot boxes. Six months of cure time is recommended for aftermarket paint work due to the lack of quick curing. Regardless, I still like to wait...

Many moons ago cars came with "break in oil", and it was a good idea to get it out of the engine after around a 1000 mile break in period. I continue this practice because; a) I have no idea exactly what oil is in my car when I purchase, and b) this 'first' oil contains everything that did not...

I purchased a 3-bag air jack, similar to shown, but with lower handles. 5.5" to 16" lift. Fits under k-member, differential, pinch welds, and jacking rails of stock height '21 GT PP. I have since made 4 riser plates from 2x12 (1-1/2" high each) for a total of 22" lift. Each plate will dowel...

I recently did my first oil change at a little under 1500 miles. I put in Mobil 1 synthetic - 5qt 5W-20 and 5qt 5W-30 (minus 400ml) plus 1 bottle (400ml) LiquiMoly Cera Tec. No tick before or after change, and possibly slightly quieter overall after. Next change will be in spring and will be...

Regardless, a good and proper seller would offer up their zip code, box dimensions, and total "as packed" box weight - especially if that seller is unwilling to determine shipping for a potential buyer. Not knowing the above info makes a potential buyer assume, and we all know what "assume"...

The shifter seems to be better than the '17 base GT, but with 2 years of a VW "R" in between, I could be mistaken. It still has more side-to-side movement when in gear than it should have. I've purchased a used Blowfish bracket that ties the shifter solely to the tranny. Just need to find...

Please give a shout if Shadowdriver does not buy, thanks !

If WildHorse falls through, I'll take it. Please inform - thanks !

SCT X4 from Shrader Tuning (Gastonia, NC) on my '21. Worked perfectly.

62 This is my third V8 Mustang. Wife has a '19 Charger R/T

AM and cjponyparts.com are both good.