Search results

Pretty cool to honor it for 15 years.

OK guys… I can’t wait to read some of the comments on this one. I got a custom Roush set up and the way everything is laid out, I had to use a silicone elbow, cut down PVC piping, and other couplers in order to make a 4 inch inside diameter connection straight to the air intake. I did prime and...

I just finished installing my supercharger kit and I noticed whenever I put the battery cables on, the pump would cycle off and on about every 15 seconds. I filled up the fluid and it ran for three or four minutes before turning off and then whenever I turned off the car and shut the door, it...

I bought a used Roush stage two kit from another member, but the previous owner changed to an inner chiller kit. So now I need the hoses that go from the pump to the lower radiator, the lower radiator to the manifold, and an additional one that goes to the manifold. Does anyone have these laying...

Self explanatory. $100 shipped.

Perfect condition and comes with belt. $100 shipped.

I bought a used Roush Kit (2019 5.0 Mustang) and I’m about 2/3 of the way in the install. I’ve got a brass barbed fitting on the top of the lower intake manifold that sits just under the fuel rail area on the passenger side. I’ve found no reference to it in the instructions. It looks like a...

I’m going to be installing a Roush SC kit and I’m going to have to add spacers to my strut towers in order to remount the brace. People say it’ll almost touch the hood or even go into the padding underneath it. I was thinking about getting a GT500 style vent hood to help with cooling of the...

Pretty self-explanatory. Anyone have one?

I’m picking up a Roush supercharge kit and from my understanding… they come with a box that changes the OS and tune on the car. This kit doesn’t have it with it. Is that the only way or is there a downloadable tune I can use for it (PCMTec or HP).

I bought this differential lockout kit from a fellow member and looked up the item number (BK051) and it says it fits my car (‘19 GT). The rear ones fit perfectly, but the front ones have the stock OEM bolt threading into the center of the bushing. This won’t allow me to Simply put the bushing...

I have a '19 Mustang with the 5.0 10r80 auto. I did a few mods like a Roush intake, long tube catless headers, and other minor modifications. I decided to just get a can tune since the mods were minor and I got them to send me a pack of 3 (91, flex, and E85). Unfortunately, I had major issues...

I plan on adding additional LEDs for more ambient lighting inside the car. Unfortunately, whenever I search, there are thousands of LED lights versus the OEM I am trying to search for. Technically, as long as the colors match, I would not be opposed to an aftermarket brand however I think they...

I’ve had this for about a year. I’ve used it about six months and now I had to purchase a different device for other tuning software. This reader works for all your basic diagnostic as well as a flawless connection with Forscan. If you’re looking at it, you obviously know what it does. I bought...

Anyone got one they want to sell?

So I plan on getting another members Roush supercharger with 16 to 17 psi pulley, port and polished, upgraded heat exchanger, larger throttlebody… Etc. Everything is going to come with the kit and as far as fuel, I have a 400 in the tank with the booster pump coming with the kit. It puts off...

I’ve got a 2019 convertible with the 10r80 tranny. I’ve heard quite of people say that the one piece driveshafts are a pretty decent upgrade and I found two that people were selling. One is aluminum and one is carbon fiber. They have both been “used for one or 2000 miles“ or at least they are...

I’ve got a 2019 GT with the BAP. It’s got that really small blade spoiler. I’d like to upgrade something a little bit larger, but did not know if there was mounting bolts going through it or anything that would prevent me from upgrading it. I guess I’d have to be particular on which one I get...

I’m lowering my car about an inch with the steeda progressive Springs. I found someone with some Koni adjustable shocks and struts I’m going to install, but didn’t know what setting would work the best for them. This will be my first set of adjustable suspension parts. I do not do any track days...

I’m about to lower my Mustang and bought the camper bolts for adjustments. I see they sell the metal plates where you can adjust your alignment and camber but didn’t know how accurate they are. One thing I didn’t understand is how you can make sure the front is aligned with the rear with the...