Search results

Gotcha on all points. Looking forward to your end results.

Cool, glad it helped ya. Those high beam wires only come off the BCM. Hate to say this, but to run a small harness the way you want, it may be best to remove the bumper cover and then you can work at the front of the car in leisure. It really isnt that tough to remove... a bunch of screws, 4...

First, here's how I got my wiring diagram. Great price cuz if ya need it, ya need it. Same price I found for my 2021. https://www.ebay.com/itm/354838788980 I can give ya 2021 info, but surely Ford changed it between 2015 and 2021. Anyways, interior high beam stuff is all computer talk and high...

2021 schematic book: Park lights do not use BCM-B, only BCM straight to tail lights. Different output / wiring for each side. Brake lights also come thru BCM before the BCM-B. I'd suspect BCM.

I finally got out at night and tried the new fog lights. Few findings: The beam pattern of these Diode Dynamics Elite Series Type A lights is amazing! They are going to be outstanding when I get them aligned... Ugh, the alignment. The factory plastic plugs that I'm using for mounting are...

Those are there to improve engine cooling by channeling air into the radiator. With an opening for intake air. If you want to reduce underhood temperature, install a hood vent. Proven to work and even increases downforce at high speeds.

Hi Joseph. Yeah, I looked at several versions of the half-halos, I reckon they are supposed to look like horseshoes? I'm not really into the non-functional lighting. And to me, it still left the dead eye sockets. I really needed to do something... one of those little things that bugs ya every...

Thank you sir.

Hard to see what the wire colors are... can you post those? Bank 2 Sensor 2 camshaft position sensor has 3 wires... a Green / Violet, which I think I see in your picture, then a Violet / Green and a plain Violet. This is for a 2021 5.0. Connector # is C2520.

Wrapped up my suspension upgrades today... Steeda rear bushing supports and alignment sleeves, dual rate springs, camber plates, replaced front right MR sensor that I broke... performed Suspension Temperature Calibration and Ride Height Calibration. Tomorrow I make the appointment for alignment.

Glad I was able to help. You can control the hyperflash in Forscan.

Thank you very much. Retired Aircraft Mechanic, 40 years working the line on big Boeing and Airbus aircraft. And always willing to share.

Thank you. Listing updated.

Thank you. It would be easy to connect the new ambers to the turn signals, the wiring is right there. That might have been cool to have them flash, too. I decided on the white lights simply because I've never been a fan of bright yellow lights. But you're right... they would have looked really...

Used drivers power seat track assembly (no memory). Comes with side trim and handle. Excellent condition. OEM for many 2015-2023 Mustang. Per ebay seller, taken out of a GT with less than 10k miles. Appears to be accurate, no damage, clean. Ford PN FR3Z9661711J. Confirm fit with your car before...

4ea, new, unused, in the box. Bosch QF 0471 TPMS Sensors for sale. These require programming before installation, then re-learning after install. If you, or someone you know, can program these before installing, you can save yourself a few bucks due to my mistake. NAPA price $37 each. I'll...

I finished installing some lights in the grill of my Mach 1, and thought I'd post up what I went thru and things I discovered. The plastic blanking plugs really bothered me. I HAD to do something. I did not like the 4-pod led's that I've seen out there... just didnt match the factory front end...

Yeah. Per the schematic, those 2 wires are spliced further up and come off the same BCM output, so no issue tying them together.

To answer this, The M1 uses a 2 lamp front park light / turn signal assy. Both lamps get park light power, only the most inboard is also turn signal.

In some instances, the Mach 1 is wired like the GT500, so you have to use the 5.2L options in the wiring diagram book. This is from a 2021 Book. The 3 pin connector on the right side is # C1042. Black/Gray is ground. Brown/Yellow is Park Front Right, power from BCM. Yellow/Violet is Turn lamp...