Search results

Bought my gt350 axle for $100 bucks used on eBay, I only swapped driver side holding up fine one track day with Mickey Thompson drag radials . Transmission broke 4th gear though. I say it’s a good alternative for someone not taking there car to the track every weekend. Nothing is bulletproof!!

2015 gt 15k boosted since (3k) Paxton 11lbs E85 sai lo fuel system 3.31 gears (3k) McLeod RXT twin disk (3k miles) Flywheel 18 manifold with delete(3k) Off- Road xpipe Barton shifter 28” Mickey Thompson tire. 780 whp engine is good transmission broke 4th gear. Ben Calimer is building a...

Is the Dss driveshaft still available? If so will you ship?

Well guys I just spoke with Astro performance warehouse. Very smart guy took the time and answered all my questions about the tr6060. Something I wasn’t even looking at but now seems more feasible and that might be an option for myself please give me some feedback on the place or trans...

Yeah, I just spoke with Ben Calimer and he said the buillet internals should be good for 900lbs of torque. Also I wouldn’t have to change the RXT clutch I currently have in it. This is the first time in three years 16k miles I had a problem with the trans. I forgot to ask him about his tr6060...

so my mt82 finally Grenaded 4th gear. I had an McLeod RXT clutch and Mickey Thompson drag radials with 3.31 gears . Now I see Ben Calimer recently released billet internals for the my-82. Does anyone have any experience with one? Or would a 6060 swap still be better? I like the gearing of the...

Good to hear. I guess I will quadruple check mine to make sure they are tight.

I went ahead and put the original axle for a couple of days and still got the sway/ wobble . So I swapped it out again and put the gt350 axle on again.

Correct only driver side. I never hear anyone brake the passenger side .

I am having the same problem you are. I swapped the driver axle, put a gt 350 axle and get this scary sway now. Took the car to get aligned. That helped a little but the sway is still there. Not sure what brought it on but just sucks my car was perfectly fine prior. Good luck and keep us posted.

Well guys I have double and triple checked everything. So took it to an alignment shop. It’s better but Still there .Just can’t figure this out so I guess I will buy bmr cradle bushing and vertical link hopefully that will take care of it

Yes fully seated I heard it click in . The axle nut I torqued to 150 lbs . Wheel lugs I never torque always you an impact on them. This has never happened to me probably will schedule an appt tomorrow with an alignment shop

so I am going to the 1/4 mile track at the end of the month. The car has a Paxton.in prepararon for this I ordered a driver side gt350 axle hopefully a little stronger then stock. I installed it and now the car Wobbles @ higher speeds acceleration and The car had 0 issues prior to swapping the...

It looks like oil from the container. My cylinder head temp are usually from 193-205 depending on weather. My IATs are driving on the highway usually about 7 degrees over what the temp outside are unless I am on the car which then they are up to 30 degrees over outside temps.

Mobil one high mileage from Walmart .

Ok guys some update. So I swapped my e85 tune and put my 93 tune and lowered the boost to 10lbs vs 11lbs spring, changed the oil to 10-40 Mobil one Vsa 5-20 Mobil 1. Now about 250 miles later and probably 5 pulls to 140 in Mexico of course my catch can is empty. Does this sound correct? Just...

I have an 18 manifold in my 15 Paxton charged. Was shifting at maybe 7300 nothing crazy. Trying to make the motor last a little longer but didn’t work out that way. Power was 771 with e85 no before intake numbers

Thanks for the replies everyone I am gonna lower the boost to like 8lbs and add some thicker oil hopefully can drive it till November like this. Looks like a short blocks will do the trick most likely will give jpc a call see what they charge for a short block.

My oil looks fresh like from a can I run 0-20 Mobil 1 probably gonna switch and order 10-30 Amsoil . When you say a ton of blow by, I fill the catch can in 2 pulls and when I release the gas on the end of second run through my catch can breather I get oil that hits my windshield . I wasn’t sure...

What up everyone. So I have an 15 Gt with the Paxton Blower 2200 and sai li fuel , 18 manifold with mmr delete and 3.31 rear in a manual trans. Car runs great made 770 whp on 11lbs of boost on E85 Had this set up since 4K miles car currently has 15k miles. My recent problem is I use to have...