Search results

Following, today cooled seat just were doing nothing.. lots of noise but no cool...

Today i flash the SCCM off the same 401a car, and Nope no luck, but i did notice something, my car has Lane assist, and the 401a car didn't so once i flashed the SCCM of the 401a car the Dash changed (i.e. i lost the lane assist graphics in the MPH "Circle") so seems like atleast the SCCM...

I've seen plenty of the cars with them, just goto carguru and filter on gt premiums you will see plenty, I'v taken 2 ABD VIN's for the IPC from these cars and flashed my dash no luck, Only ever get the tach display option on/off "X" never the menu. my car is a 400A with a few other options...

After trying a couple of diffrent setting in the IPC no luck, get that menu enabled, going to see if i can find a mustang on a local lot that has digital dash and see if I can figure out something with the ASB data Double checked 720-02-01 is 2xxx-xxxx-xxx for Manual so that wasn't it...

, yes My car has rev matching. I have a couple of things to try today and will post the results.

Are you saying this enables the Tachometer Display Menu, under display settings? I've seen the Gear indicator on both Manuals, and Auto's 2018+

I have a thread going on this... https://www.mustang6g.com/forums/threads/digital-dash-upgrade-doesnt-show-tachometer-display-2019-gt-premium-manual.142273/ Anyone with help would be great!

So, still lost on my issue then, because 1) i have 2019 Premium 2) Can't figure out how to get the menu to even select it. Anyone else have some ideas?

I think were honing in, if I use forscan 2.3.33 beta in the ipc module they have a display tach value (disable , enable) and what that gets me is this in the pics below, so I'm still hunting down the actual menu you have. Do you have you ipc data? What other options did you car have before the...

Thanks, sent a note, just an update, the option i'm looking for is under the Setting Wheel, Display Setup, Tachometer Display, currently on my digital dash its not show, i only see Measurement Units, Temperature, Tire Pressure, ect. So it feels like the Menu needs to be enabled, Looks like...

Thanks for confirming, since there seems to been Real Digital Dash Manuals that show the gear, would be interesting to look at there As Built data if there willing to share

Did a digital dash upgrade on my 2019 GT Premium everything seems great no issue, but i recently came across a couple Youtube videos where even on the Manuals they showed the GEAR the car was in, does anyone have that ForScan info? Would anyone that has 2019 GT with digital dash be willing to...

Based on your comment, if you doing a wheel at a time are you suggesting disconnecting the sta-bar completely; Clock, and then reconnect? seems like that would have the desired effect?

Matte Black and Metallic Blue, https://bigwormgraphix.com/vinyl-color-chart/ Quality from these guys was really good, more pricey then some places...

Matte for me

So i'm confident on the rear shock mounts and sway bar end links are all torque to spec, i did drop the IRS to get the factory springs out so i'm thinking maybe the your on to something with the bushings or and subframe that i didn't get back inline or torque correctly, I do have a Steeda S550...

from the floor

so right now i'm at 27 1/2 sitting, and 29 1/2 with weight taken off the rear, so sounds like im in line with your suggestions. This is my first car with coil overs, so it could just be me getting used to it, on the roads here in Mass. Pic attached

wire tap, and custom 3d printed "blend Mount"

Went thru and adjusted all four corners to soft it helped alittle but didnt go away. My question is the shock its self has a height adjustment also is it possible that is off? I couldn't find any good explanation of how that should be set against the height of the rear spring.