Search results

Do you have any sound clips?

No, I was whenever I had the stock GT AE, but if I did get a WOT Box, I’d just use the no lift shift

The valves on the Mach 1 mufflers were welded open, and yes catless LTHs, also I might try to see if I can get the valves to work somehow

It is a set of 2MFab catless longtube headers

I have a 2016 GT with factory manifolds, h pipe and Mach 1 mufflers. I have a set of longtube headers and I was wondering how would they sound with my current setup. Anyone with a Mach 1 or GT w/Mach 1 mufflers have a h pipe and longtubes installed? Any sound clips?

I gave it a couple quick hits to tighten it, and then a couple more to make sure, I didn’t hold it down the whole way

That might be the easiest way to go

I used an air impact, started it by hand first, and when it got tight, gave it a couple quick hits to make sure

I just bought a new set of caliper bolts, the broken subframe bolt is gonna be the big issue to tackle

I installed the lowering springs but had everything tightened, installed back correctly, the last place it was at that even messed with that side was the ford dealer when I broke my axle

I have a 2016 Mustang GT, and recently about a week and a half ago, when I would press on the brakes to slow down, it would make a metal grinding noise, and turns out one of the bolts holding the rear caliper backed out, and one didn’t take much force to break loose, which I fixed that, but at...

It sounds so unique compared to other setups

Have any sound clips?

I have a 2016 GT currently with Mach 1 mufflers and a h pipe with the factory manifolds, are there any Mach 1 owners or GT owners with headers and a Corsa/2mFabrication double x pipe or just any brand x pipe? How does it sound?

I don’t know by any chance, it looked like a eBay splitter but I’m not too sure

Also every time I recharge the system up, it only works for a little while and then goes right back to blowing warm air

I have a 2016 Mustang GT, and for the past couple months every time I turn the defroster on, or the ac on, there’s a noticeable hissing noise from what seems to be behind the dash, and I’ve been trying to figure out what it is. Could it be the evaporator core, or something else to cause that...

They could, it’s just that the tips sit lower than the GTs, so the GT500 valence would also be needed

I have some Mach 1 mufflers I had bought to install on my car, but decided not to after hearing different aftermarket setups, the valves have been welded open by the previous owner, possibly wanting to trade for a set of 18+ Borla S-Type axlebacks, I have a 2016 GT

I have a set of Mach 1 mufflers I was planning to put on my 2016 GT, but ended up deciding not to, the previous owner had the valves welded open Would possibly trade for a set of 18+ Borla S-Type axlebacks 350 obo, prefer local pickup