Search results

its still pre filter on '19. i'm pretty sure it made the turbo whistle more, but it was so long ago that i did it. https://www.mustang6g.com/forums/threads/the-great-big-cai-thread.16435/page-28

also a intake silencer. i cut mine off and plugged it.

i made 7 or 8 passes total and i couldn't get below a 2.0 60' on ET street R's. My previous best on P-Zero's was 12.79 @ 108.5 with a 1.963 60' with cobb 93 tune. Here's a bunch of easy to read bullet points with my thoughts. -peak air temp of 60F, with overnight low of 44. Track was cold...

hey one actually being used on track

i imagine inside the box is a PLC. I'm not too knowledgeable on PLC's and what is required to change the CAN stream for other applications. probably a cost/benefit thing for MMR.

My 80/20 drivers headrest mount, gopro mount approx 9" from right post of headrest. Some have expressed safety concerns in the past, maybe if i got thrown out of my seat and got pinned between a rigid part of the body and the end of the mount. That's a risk i'm willing to take. any of the...

are you planning on using audio from that cam? i imagine you would get a ton of wind noise. even an ext mic with a wind sock, mounted to the head rest but on the opposite side, had a lot of wind noise. moving it to the cup holder reduced it a bit. video might look better if it were on the...

if i'm cruising i left the gear shift in "D", if i need to rapidly change speed i pull it back to "S" so it doesn't take a ton of throttle input to downshift. it's easy to bump it back and forth between the two.

try spoofing gps location to mexico?

did you get a low oil light? or how did you know it was 4 qt low?

somethings not adding up 🤔

nice to see some outside the box solutions with the laminova cooler. water to air heat transfer is more efficient than oil to air.

having footage to review can be helpful too. it can be hard to remember things that happen over the course of an event. that rollcage could be a good mount :)

https://racelouvers.com/content/Race-Louvers-Fan-Shroud-Wind-Tunnel-Data.pdf

unfortunately i don't have any data from recent my track outing at a different track. i didnt't bother to check which parameters i was logging. i also forgot to bring my sd card adapter for my infrared brake sensor. i have fired my data acquisition engineer. Removing hood insulation maybe...

looks like there are templates for 360 video.

the bronze ones above are what i bought. I have the PP with a 3.55 and totally forgot about first gear leave. is this going to be as big of an issue on an ecoboost as GT?

just saw a set locally with pirellis, tpms and lug nuts for 1200. take that as you will.

if you wanted to fab them yourself, i could just send a pdf template to print out at 1:1 scale

just curious which ones you are looking at ( mainly the thickness). you could buy sheets of titanium online and fabricate them yourself. Or you could have one of those online proto sites laser them for you, but they are going to be expensive for 4 of them. Either way, i could help you, i have a...