Search results

MidwayJ is correct, the offset for the rear 19x10 for the AM wheel is +48mm and the backspacing is 187mm. The front 19x8.5 wheel offset is +30mm with 150mm backspacing and they are cast wheels. Trying to think of what I really want out of my new warm weather wheels and tires is just a good...

Awesome, thank you for taking a look and the explanation for each set. If I decided to go with the SVE Drift wheel, being 19.9x5", I'd be better off buying the wheels alone and shopping for a 275/40R19 tire for a better fit and not need to mess around with spacers or camber, right? It almost...

Opps, my apologies. First set https://lmr.com/item/WTK-122902H/mustang-sve-gt7-wheel-tire-kit-19x10-black-15-18-ohtsu Second set https://lmr.com/item/WTK-1007DES2/mustang-flat-black-sve-drift-wheel-achilles-tire-kit-19X9-5

So with either of the sets I was looking at above require any spacers or need camber adjustment anything to look right? Thank you for the explanation btw

I've never had a car like this before and only ever bought OEM tires for my other cars when they needed them. I'm looking at these two now. First set has a satin finish and second is flat. First set is a 19x10 wheel and fitted with 285/35/19 tires and the second set is a 19x9.5 wheel but also...

I'm running dedicated winter tires and stock GT wheels right now and I'm starting to look at summer tire packages on American Muscle. I came across these wheels which I have loved on the older GT500 cars. https://www.americanmuscle.com/matte-gt500-2015.html According to AM they will fit no...

I purchased some axlebacks and would like to add an H pipe as well, would it be possible to get a coupon code?

I'm either really dense or haven't had enough coffee but I just can't picture this. So just the very tips of the jack stand should be touching the jacking rail and not sitting down into the U, is that correct?

Probably a stupid question but I finally put on my Steeda jacking rails and am curious if the "U" shaped top of the jack stand is supposed to let the rail sit at the bottom of the "U" or should I still be using the pinch weld locations? If I'm supposed to use the pinch weld locations is the...

so the car will always have a check engine light on?

I'm hoping someone can clear something up for me here. I'm watching ebay for parts and found the following part numbers fr3t-18b955-fa fr3t-18b955-fb Is this the right touchscreen for car play? I don't want to buy the MFT touchscreen but I read this in the listing ( I have a 2017 GT) . Can...

Is that just a gopro mount on the glass with the session attached?

Anyone have drive-by's of their AWE Touring catback? I can't decide between that or the Roush catback

thank you very much!

If you're still doing these would you do me a solid and grab the sticker for my VIN? 1FA6P8CF6H5343646

This is my first performance car so I've been looking around at all different systems. Is there any benefit to going with a catback system versus axle back? I'm still in factory warranty mode so I'm not going to be throwing every performance modification at it but would love something better...

Benny, I'm looking for this piece FR3Z-17K835-BA, this is the GT Premium bumper cover, minus the valence, right? shipping to 14502?

This might be a stupid question but will I need a tune of any kind after installing a catback?

As far as I can tell the GT Premium rear bumper will direct swap in place of the base bumper, right? I've looked at LMR and they have one unpainted without the backup sensor holes for $550, I would also need a valance which they also have for $160, so for roughly $710 I can do this swap if it...

Hello! I'm picking up a 2017 GT, base on Thursday and I've been researching exhausts like crazy and I'm hoping to get a little clarification on what I'm seeing. After spending so much time researching different exhausts they kind of blend together like I've looked at too many. I've never...