Sponsored

Search results

  1. Post Pix of your S550 with aftermarket wheels and tires

    They look exactly the same to me. Just like the GT350 replicas that are sold by several vendors they are probably the same wheel with different finishes.
  2. BMR vs Steeda low profile jacking rails

    I bought my car used with the Steeda jacking rails and IRS braces already installed. The rails work great but fall more than slightly below the pinch welds. I'd say they hang down about 1/2" below the pinch welds. This wasn't a concern before but now that I'm going to lower the car I am...
  3. BMR Tech Tip: Clock those bushings after lowering your S550!

    Are there any photos of the bushings that need to be re-clocked? There was mention of some photos of the parts but I did not see anything in this thread. Thanks
  4. ZL1 Addons rock guards for s550 - full instructions with photos

    I just received my set of regular guards to install and have a couple questions: The instructions I received are not the one's posted by the OP. They say to apply the tape to the fender edge but my guards came with the tape applied. Should I remove the tape, clean the area as noted in some of...
  5. BMR SUSPENSION'S S550 Lowering Springs: STANCE PICS!

    Does anyone know if the SP089/SP082 combo on a base GT will be able to get by without C/C plates or camber adjusters while I'm on the stock struts? I'm just looking to get it to normal street driving specs. as I probably won't toss new struts on until I can get some PP take-offs in the future...
  6. 470whp is not possible from just intake, LT w/ cat-back, and tune right?

    I agree about trap speed. Run it down the 1/4 and get an average MPH over a few runs. Take the MPH, car weight, and use whatever the % loss is to the wheels with your transmission and you'll get a much better idea of what RWHP you are working with.
  7. Firehawk Indy 500 no longer available in 255...245 ok?

    I verified these weren't the Indy 500 wide ovals from the seller and bought them off e-bay. I received them and they are the Firehawk Indy 500 tires I wanted in 275/40/19. They were manufactured 11/16. I am happy I got what I wanted as Tirerack told me 2-3 months for restock and my local...
  8. Forum discount?

    FYI... I used the coupon code: 14fbookcode today at checkout that was given in an older post that worked and it was good for 6% off on some wheels which was nice. I'm guessing the AM rep. is no longer on this board as you can see by lack of responses from them in many months.
  9. "Bill Kessel" H-Pipe?

    I have the Ford Performance by Borla touring whatever cat-back system the original owner put on. It does not drone; but it's a bit raspy for my taste due to the X-pipe in it. I would much prefer an H-pipe sound as that is what reminds me more of my fox body cars.
  10. Firehawk Indy 500 no longer available in 255...245 ok?

    Can anyone tell me any potential issues if I buy a set of Firestone Firehawk Indy 500 tires that are 4 years old? I found a source online for the size I want that said they are brand new but might be up to 4 years old. I'm not sure if that is OK or whether or not the tire compounds were...
  11. GT350 intake w/o headers

    I'm confused by your statement above. Are you saying the GT-350 manifold is not worth doing at all; with or without headers?
  12. Firehawk Indy 500 no longer available in 255...245 ok?

    They must be a write off for another business; they are terrible at the marketing and business side of things. They were out of two different sizes of Indy 500 tires I was looking at, everywhere online and local, with only a TBD for another batch to be made. In the beginning of a long driving...
  13. Aggressive Fitment Thread

    Those wheels look great! Do you have a direct side shot of the car? Trying to see where the wheels sit in relation to the fenders. Thanks!
  14. SVE vs MRR GT350 wheels...

    I think those tire sizes will both look stretched a bit much on the front and back. I'd go with 285/35 front and 305/35 rear with those sizes. If you want a square set-up you might want to return the 11" for 10" and maybe run 285/35 or 275/40 all around.
  15. SVE vs MRR GT350 wheels...

    Originally Posted by solodogg Here is one from right after they were installed. I think I read in another thread he's running a BMR SP089/SP082 combo.
  16. Official RTR Tech 7 Install Thread!

    That look awesome! Is that with the factory PP springs?
  17. Aggressive Fitment Thread

    Great looking set-up. 1) Do the rear wheels rub at all on top? 2) Is that a 3-legged dog (cat maybe?)in the last photo? :D
  18. Revolution Auto GTPP runs 11.87 @ 117

    I'm not sure what is going on in this thread? Someone replied to a 3 year old post with some mods listed and no time. Then the replies after are mixed responses to the 3 year old posts and to the person who bumped this up. :lol:
  19. SVE GT7 Wheels

    Nice looking wheels. The description is cringe worthy though...:D "Bolt on supercar styling to your 2015-2017 Mustang with the all new SVE GT7 wheel! Designed to accentuate the body lines of your S550, the SVE GT7 wheel provides an electrifying look that's sure to turn heads! Each spoke on...
  20. Spare Wheel & Kack

    I bought one from there and they forgot the Kack. Needless to say I was jacked up about it! :D





Top