Search results

I’m wondering, what’s the best drive mode and traction control settings for roll racing my 2016 Mustang GT (6R80) tuned by Wengerd? Not sure which one works best.

Was there lowering springs on this if so which ones and what kind of spacers exactly this fitment looks real good?

Hey everyone I’m having a weird issue with my 2016 Mustang GT. After a hard pull, several warning lights come on, sometimes all at once: Service AdvanceTrac Hill Start Assist Not Available Airbag light Drive Mode Not Available These lights only appear during hard acceleration. If I drive...

No the reverse camera seems to be well aligned what else do you think it could be I did disconnect the steering shaft and I spun the wheel while it was disconnected and broke the clockspring but that was mainly causing steering buttons and stuff like that not working and that is now fixed after...

I got these codes U0452:86 (Invalid data from restraint control module) C0051:67 (Steering angle sensor signal incorrect after event) hill assist seems to have turned off after tightening passenger side motor mount ground bolt I fixed the steering shaft and stud rubbing headers and there’s no...

I cleared the motor mount and steering shaft so that doesn’t make anymore noises and fully tightened passenger side motor mount ground which seemed to get rid of hill start assist light but after hard pull but I’m still getting airbag light and service advance trac lights which go off after a...

Speed engineering 1 7/8

I’m waiting for the rest of my exhaust but do you think that’s why those codes are being thrown or because my steering shaft is rubbing?

I’m just waiting for the rest of my exhaust to come i had problems with speed engineering so they only sent me the headers but the rest of the exhaust is on its way. Do you think those codes will go away? Also my steering shaft is rubbing header and so is the top stud of the driver side motor...

I have Speed Engineering 1 7/8 Catless LTH leading to an x pipe to a stock resonator to currently no mufflers I’m looking to buy some mufflers

Hello, I’m looking for muffler recommendations to make my car sound good. I’m currently running Speed Engineering catless 1 7/8 long-tube headers, an X-pipe, and the stock resonator. Which mufflers would give me a nice tone without being too obnoxious or raspy?

Hey everyone, I’m running into a mess after installing long-tube headers and I’m hoping someone has seen this before. Right now I don’t have a tune, my rear O₂ sensors aren’t plugged in, and I’m just running header dumps while I wait for my mid-pipe. Whenever I do a hard pull, my car throws a...

I was able to get a clockspring from a junkyard 2013 fusion and it fixed the issue thanks

I just installed long tube headers on my 2016 Mustang GT (automatic, premium), and now: Steering wheel buttons are dead — horn doesn’t work, paddle shifters don’t work, and the button backlights are off. Airbag light is on. Hill Start Assist light keeps coming on, even though I have an...

How come?

So all I need is IMRC lockouts and tune ?

Im going to get it tuned just wondering if it was like headers but my questions are about what else is needed mostly

I’m planning to install a Gen 3 GT intake manifold on my Gen 2 Coyote and still using the stock 80mm Gen 2 throttle body. I’ve seen mixed info everywhere, so can someone tell me straight up — do I need a throttle body adapter plate to make this work, and can I run it without a tune if I keep the...