Search results

Just a FYI. Last winter, I found engine oil which bypassed my Oil Separators and got sucked into my Whipple front PVC inlet tube and was sucked into my Whipple 3.0. the whipple twin screws were coated/soaked with oil which was going into my intakes, heads, cylinders etc. I had to clean the...

Selling my JLT oil separators both Passenger and driver's side. 2000 miles

A set of injectors I received with my Whipple stage 2 kit. Never used

I am selling a set of rear MMR Toe Arms with very little use.

I am selling my AAD Camber Links, Toe Arms and Vertical Links. They have 2000 miles on them.

I hope this is the turning point for manufactures to start manufacturing vehicles the majority of people want to buy.

I just installed a set of MMR rear Toe Arms and Steeda Camber Arms and now have a noticeable clicking/popping noise. I see on the 7G site a member had the exact same issue and it was the MMR Toe Arms. I Does anyone know of a fix besides just replacing with a different manufacture set? Thanks

It would be nice and I might just do this mod this winter. I want a F1 Syule Front Sode Push Button Up and Down shift for my A10. I really see the rear pull back shifter handles as being very slow and bombers compared to Push buttons located on the front sides for quick Thumb Push Button shift...

I just installed steeda Bump Steer kit to reduce or stop my Bump steer which I was experiencing. I just took it out for a drive and my Bump steer is gone or not noticeable like it was preveously. My steering arm and the rear control arm are both now at 0 angle. So they do work.

When I switched to larger wheels, tires my brakes were noticeably less efficient/effective than with my stock tire. I just installed my new EBC Blue Stuff Pads, and I can say, they are day and night difference as far as braking. The brake hard and fast without having to press hard on the brake...

Just an FYI: I am upgrading my brake pads to EBC Blue stuff when I noticed my driver's side outer shaft nut loosened up around 3/8" even with the Red loctite and 200flbs torque. 200flbs. .

Thank guys for the help. I have what I need to start researching. After researching reliable, efficient High HP capable FI system, I have come to the realization that I must consider a "fully Controllable" twin turbo system to achieve my goals of sustainable and reliable HP of up to 1500whp...

I'm thinking since I need a winter project, I figured I would go on and remove my stock 5.0, and buy a short block speced out to handle around 2000hp+ have my heads completely modified, send my 10R80 out to be upgraded etc. I will use this forum as well as others to gather info for such shops...

After installing my new Hoosier TAP tires I finally realized what the odd feeling was up front with my steering, I guess with the Firestone 500 tires they just didn't grip enough to cause noticeable Bump Steer, but I notice now. What bump steer kits have owners had the best luck with in...

I have put around 250 miles (I know not allot) and have some interesting feedback on them. I got my Tires Heat cycled which "supposedly" increases traction. When I first drove my car on the road it was like I was driving with sticky tape tires, I mean every little rock, pebble was being picked...

Just wondering for i am going to start running this Fuel is a true E85

I just installed a set of "Heat Cycled" Hoosier TAP tires. Not only are they stickier than he'll, they are 6.5 lbs lighter than Toyo R888R tires. They are crazy light.

Just finished wiring in a set of LED latching Push Button Switches for Being able to deactivate the AdvanceTrac and Put the AC in 100% FI Cooling for the Whipple Coolant.

Just thought I would mension and give my feedback on Motion Raceworks Atmospheric PCV Vent Catch Can. Even at 15lbs boost the only thing caught in the Can is pure clear water. Generated by the heat of my crankcase, E85 and air intake. It's so close to neutral crank case ventilation that I...

Just wondering if their would be a benefit swapping out my 3.55 rear gears to a 3.31 gears for my Boosted application. Would this help or hurt with traction on the street and be more predictable, longer shift durations ETC? Plus Keeping me out of the overdrive gears, 8-9-10. ** Also At what HP...