S550 to S650 parts swap and interchangeability possibilities

[WolfMxbee]

oh my I will be stalking this! I want to do the black door handles and pulls from the dark horse.

My questions I guess is the reverse will the s650 handles/pulls go into a s550 door panel?

I have confirmed something about the S650 door pulls on our S550 door panels, you do have to remove the extra ear on the S650 piece but besides that, it's a perfect bolt in

Sponsored

 

[MACHtobers Very Own]

I have confirmed something about the S650 door pulls on our S550 door panels, you do have to remove the extra ear on the S650 piece but besides that, it's a perfect bolt in

You just expedited a call to my dealership!!!!

 

[WolfMxbee]

You just expedited a call to my dealership!!!!

Well I mean since I'm the first to research and confirm the door panel fitment with slight modifications and have both door panels, any questions you guys have, I wanna help solve them even if it doesn't serve my needs, everyone here helps each other so I wanna throw in my 2 cents too

 

[K4fxd]

Any chance the S550 dash will fit the S650?

 

[WolfMxbee]

Any chance the S550 dash will fit the S650?

Theoretically, I wanna try that next but my issue is gonna be to wire the dash up with the additional modules to run the dual screens as it replaces our radio panel

 

[K4fxd]

Theoretically, I wanna try that next but my issue is gonna be to wire the dash up with the additional modules to run the dual screens as it replaces our radio panel

I'd want to get rid of the screens and use the 550 dash in the 650.

If this is possible I might consider a 650 as the screens are a deal breaker for me.

 

[WolfMxbee]

I'd want to get rid of the screens and use the 550 dash in the 650.

If this is possible I might consider a 650 as the screens are a deal breaker for me.

The issue would be the additional features the new s650 has to communicate to the s550 vice versa, I'm pretty sure the dash will fit with small modifications as comparing photos of clips and mounting points, the center console and dash look doable with most factory screw and clip points landing in same spots but electrical will be the hard part

 

[WolfMxbee]

Who wants to pitch in a go fund me to confirm this dash swap will work

 

[WolfMxbee]

Update: I got my driver side yesterday and already precut the latch surround and everything was plug n play except the window switch.. it was but wasn't and I'm not sure if it's because I got a memory door panel vs my Base but pinouts were wrong which after research that the door has a module in upper left side that has a memory version and non memory so maybe that's why the pins were different but the s550 switch fits in the s650 door plastic trim, door has a minor gap but only due to I haven't trim the weather stripping on top left corner so it sits flush

S650 is orange tag where s550 is white

 

[Mike Pfeifer]

I’m curious if S650 seat covers would fit the S550 seat frame / foam padding. Just like the door panels, they are just different enough to be interesting.

 

[WolfMxbee]

I’m curious if S650 seat covers would fit the S550 seat frame / foam padding. Just like the door panels, they are just different enough to be interesting.

The seats are the same as the S550, even the rears, so should be a good swap

 

[MrMike]

The seats are the same as the S550, even the rears, so should be a good swap

Really? Including bolt pattern to the floor?

S650 Recaros and FP S650 Recaros are quite good looking but I was concerned about fitment.

If all I'd have to do is swap the bladder/OCS sensor under the passenger seat like with 18-23 seats, that's no big deal.

 

[WolfMxbee]

Really? Including bolt pattern to the floor?

S650 Recaros and FP S650 Recaros are quite good looking but I was concerned about fitment.

If all I'd have to do is swap the bladder/OCS sensor under the passenger seat like with 18-23 seats, that's no big deal.

Bolt pattern should be the same, considering all the aftermarket seat bracket companies like planted are now advertising s550 for "fits s550 & s650" as there brackets are molded over the factory floor bracing and bolt pattern

 

[MACHtobers Very Own]

@WolfMxbee told you you expedited a call. These showed up today from dealer.

Hopefully will have update in next month

 

[WolfMxbee]

@WolfMxbee told you you expedited a call. These showed up today from dealer.

Hopefully will have update in next month

I was gonna order those but I actually decided to wait cause I found some 4x4 twill carbon pieces that matches the fake carbon texture on the s650 door panels so gonna do it in matte 4x4 carbon

Sponsored