WhiplashGo
Well-Known Member
- Thread starter
- #1
I have a 15' GT with aftermarket MRR 350 rims. I have GT350 replica fenders installed & wanted front rims pushed out a little for looks. Got 1/2" longer APR studs & 8mm spacers from Optimum Performance. When installing @ shop, existing lugs would not clear longer studs & were bottoming out. Lugs are Gorilla closed end (shown in link) https://www.cjponyparts.com/gorilla-lug-nut-kit-small-diameter-black-2015-2020/p/WHLLN17/
They suggested cutting off ends of existing lugs, making them open in order to clear new longer studs. I told them to go ahead. Now Im looking for a black lug that will clear studs with my new setup. I would prefer closed end lugs. Not sure what will work, suggestions, links please.
Would these work?
https://www.vividracing.com/-p-1527...MI_-r7qYO66gIVS7LICh0msQCMEAQYASABEgIbi_D_BwE
And these caps to make look like a closed end lug
https://www.amazon.com/Monster-Lug-33007B-Black-Cover/dp/B00AKFBHI4
They suggested cutting off ends of existing lugs, making them open in order to clear new longer studs. I told them to go ahead. Now Im looking for a black lug that will clear studs with my new setup. I would prefer closed end lugs. Not sure what will work, suggestions, links please.
Would these work?
https://www.vividracing.com/-p-1527...MI_-r7qYO66gIVS7LICh0msQCMEAQYASABEgIbi_D_BwE
And these caps to make look like a closed end lug
https://www.amazon.com/Monster-Lug-33007B-Black-Cover/dp/B00AKFBHI4
Sponsored
Last edited: