Sponsored
JKL1031's latest activity
-
JKL1031 replied to the thread Added JBX Carrier bearing and have vibration now at highway speeds.Did you notice better clutch engagement? -
JKL1031 replied to the thread Added JBX Carrier bearing and have vibration now at highway speeds.Torquing the center bracket at droop does not create a problem as its fixed and is not clamping a rotational part.
-
JKL1031 replied to the thread GT350/GT clutch bleed assistance/guidence.The GT just has a elbow, no valve. The vacuum pump from HF is 26 bux. Pick a nipple adapter to the end, pull the hose off the reservoir...
-
JKL1031 replied to the thread GT350/GT clutch bleed assistance/guidence.Mine was super airlocked Since I alsorr did a stainless line. I ended up buying a bleeder From Harbor Freight And Pulling vacuum Right...
-
JKL1031 replied to the thread Worn Inner Bushing- Steeda RR Adjustable Camber Arms.Honestly I have an acceptable amount of clunking noise most s550 have lol. Ive shuffled around the bushings and used some I had machined...
-
JKL1031 replied to the thread GT350/GT clutch bleed assistance/guidence.My tips -Do not use your power tool reconnecting the starter signal wire. Something told me to slow it down but I sheared the stud...
-
JKL1031 replied to the thread GT350/GT clutch bleed assistance/guidence.bump for ideas, same issue here.
-
JKL1031 replied to the thread Worn Inner Bushing- Steeda RR Adjustable Camber Arms.I bought replacements and they were worse. Asked for refund and belive there was no response as I dont see anything after that. I still...
-
JKL1031 replied to the thread What I learned: Clutch Replacment (NO LIFT).Just want to add for anyone else. I decided to tackle this job myself. Putting the trans back in today hopefully, would like any tips...