Sponsored
Biggsy's latest activity
-
Biggsy replied to the thread Biggsy's Track Build.I plan to go with BMRS assemblies and I think a 4k tool is needed lol so I will let IR handle that -
Making the hoses DIY is no big deal. Get this and you will succeed easily. I like to terminate one end, screw it into place, then feed...
-
Biggsy replied to the thread Biggsy's Track Build.another small project i am working on if all parts come in this week is relocating the coolant tank to improve air flow behind the...
-
-
Biggsy replied to the thread Biggsy's Track Build.no idea. I removed my ac stuff a year or so ago. dont want to mislead you and say it should fit.
-
Biggsy replied to the thread Biggsy's Track Build.yea i was looking at that initially. the adapter by itself is the same cost of the kit lol. crazy where are you getting the temps from?
-
Biggsy replied to the thread Biggsy's Track Build.yup. Just followed the TSB and they remove the flappers from air flow improvement
-
Biggsy replied to the thread Biggsy's Track Build.Here are other angles. You will need an adapter for oil sensor port because it is a M12 x 1.5 thread. I bought the adapter on...
-
-
Biggsy replied to the thread Biggsy's Track Build.yup. it is.
-
Biggsy replied to the thread Biggsy's Track Build.Didnt have it in PL but I also upgraded to the Fluidyne triple pass radiator and put holes in the fan shroud similar to the TSB for the...
-
-
Biggsy replied to the thread Biggsy's Track Build.for oil cooling, I went with the DH(R) set up. GT500, FP350 all use the similar style oil filter adapter. Ford Racing also sells the...
-
-
Biggsy replied to the thread Biggsy's Track Build.BTW this is the complete list of all the parts collected over the past 2 years for this new iteration of the car. Some pictures to follow
-
-
Biggsy replied to the thread Biggsy's Track Build.yup original trans although it may need a rebuild soon. but its still good yup OEM gen 3 That's understandable about the timing. I...
-
Biggsy replied to the thread Biggsy's Track Build.Car is semi finished. Need to relocate coolant reservoir to install CAI, plumb oil cooler and dyno tune. Headed back home tomorrow
-
-
Biggsy replied to the thread Biggsy's Track Build.wasn’t too bad removing the block and trans with two people. Getting the new one in with headers and oil adapter was a challenge. Needed...
-
Biggsy replied to the thread Biggsy's Track Build.Haha. We had a few conversations. Day 2 went well. Took old block and trans out yesterday. Put new engine in today. Installed...
-
-
Biggsy replied to the thread Biggsy's Track Build.Well beautiful people…the time has come. Towed the car west to Tennessee to install the new heart. Years of collecting boxes of parts...
-
-
Biggsy posted the thread Maryland Custom Anti Gravity ATX-20HD battery mount in Audio/Visual/Electronics/Nav/Guages.Relocating my battery and no longer need. Very solid design. Here is the link to the thread about it. Mounts in factory location. $55...
-
-
Biggsy reacted to Jet One's post in the thread From Track Prepped GT350R to GT350 Race Car. Why it was the Best Decision for me with
Like.
Hi all, Ive been pretty active tracking my '17 GT350R since 2019. I ignored all the GT350 engine stories and enjoyed my car on track... -
Biggsy reacted to WItoTX's post in the thread Do yourselves a favor and check your sway bar end links. with Like.
Just watch those grease zerks. On mine, I had to ditch the Steedas when I went to the FP swaybar because they hit the strut/Magride wiring.
-
Biggsy replied to the thread MT82 Cannot get into first. Linkage or air ?.Here is the link to it https://lmr.com/item/M7600C/96-17-mustang-high-load-pilot-bearing-m-7600-c
-
Biggsy replied to the thread MT82 Cannot get into first. Linkage or air ?.Just read the post. Being that it has an aftermarket clutch I’m like 95% sure it’s the pilot bearing. I was chasing the issue for over 2...
-
Biggsy replied to the thread MT82 Cannot get into first. Linkage or air ?.Pilot bearing. $20 part. Lol.
-
Biggsy replied to the thread Maryland Brand New Improved Racing ENV-171.$290 shipped -
Biggsy replied to the thread GT350 Build - Autocross Time is Great but Track Time is Better.Did you corner balance?
-
Biggsy reacted to WItoTX's post in the thread GT350 Build - Autocross Time is Great but Track Time is Better with Like.
Doubles, the 8300s. Meant to post that, but got sidetracked on the trailer thing. No reservoir in the front, reservoir in the rear.
-
Biggsy reacted to WItoTX's post in the thread GT350 Build - Autocross Time is Great but Track Time is Better with Like.
1 because it seems to rain at least 1 day on the weekend I pay a lot to experience a track, 2 because it would be really nice to throw...
-
Biggsy replied to the thread GT350 Build - Autocross Time is Great but Track Time is Better.nice! doubles or singles?
-
Biggsy replied to the thread GT350 Build - Autocross Time is Great but Track Time is Better.Awesome write up Kyle. Didn’t realize you went to coilovers. Cortex? What spring rates?
-
Biggsy replied to the thread What did you do to your S550 Mustang today?!.Getting the new (to me) diff ready for Kelltrac Big Bertha kit. Seals and bearings will be done later today. if anybody ever does this...
-
-
Biggsy replied to the thread Arizona Klaus Carbon fiber Swan Neck Wing w/Trunk, welded hard mounts ***fits ALL S550 models***.I know the question wasn’t directed to me but I reached out to Klaus when I was shopping for a wing. They offer a lot of custom items... -
Biggsy replied to the thread GTD in the wild at Costco.I’m going to take a wild guess and say that’s Nick Smither’s car. Driver in the Mustang Cup and Challenge series. Don’t think he is a...
-
Some more pics of the wang. Thanks to Black Tie Racefab for the mounts.
-
Thanks to @NightmareMoon and Zebulon the new rear wing is installed and it definitely works. There will be some front aero and rear...
-
Yes. The shortcomings were presented to the right people early on. However I suspect that they opted to not change the design for only...
-
Biggsy replied to the thread My GTD journey.For the sake of the conversation if they came out with a track only model with a bigger fuel cell, fixed seat, etc ( similar to FP350S...
-
Biggsy replied to the thread My GTD journey.lol I was being facetious and look at what that got me? A serious and unfortunate answer. But I get it. That’s a lot of pennies to not...
-
Biggsy replied to the thread My GTD journey.The gas tank was too small
-
Biggsy replied to the thread Biggsy's Track Build.Working on a few things. Wanted to redesign my wing upright so I did that and it came out better than expected. brushed the aluminum...
-
-
Biggsy replied to the thread What did you do to your S550 Mustang today?!.
-
