Hood Turn Signal Not Working

[Mission2toilet]

Picked up 16 GT Premium late yesterday and hood turn signal won't blink.. Anyone can direct me into right direction? I am about to check the fuse. Thanks~~

Sponsored

 

[jasonstang]

Check the fuse, check the connection.

 

[TheDivaDanielle]

new car, notify dealer, IMO

 

[Mission2toilet]

new car, notify dealer, IMO

I thought of that but Christmas and I had no patience lol.

Checked Fuse diagram and there isn't one:shrug:

 

[kbow13]

Bump, having same problem but don't have the time to drop it off at the dealer.

 

[FordService]

Bump, having same problem but don't have the time to drop it off at the dealer.

Hi kbow13,

Once you have the time to head to your dealer, please send over a private message with your VIN, mileage, best daytime phone number, full name, and dealer info. We'll look into this further.

Meagan

 

[Cobra Jet]

Picked up 16 GT Premium late yesterday and hood turn signal won't blink.. Anyone can direct me into right direction? I am about to check the fuse. Thanks~~

Check fuse first. More than likely it's not the fuse if that ties into other components.

Open hood, if you have hood liner, pull down the liner and follow the harness that goes to each blinker and where it ties back to the main harness. Check to make sure all plugs are pushed or plugged in securely. Test blinker.

Last item would be actual LED or bulb is not working. Replace as needed.

 

[mbeale68]

Mine haven't worked since I bought the car at the end of December. I just took a quick look under the hood, and there is a harness at the rear of the hood on the driver's side that is not connected to anything. The connector was just tucked into the gap between the inner and outer fenders. I couldn't see any sign of the mating connector and harness. I think my car might be missing some of the wiring for the signals. I'll have to talk to the dealer about it when I take the car in for its first service.

 

[mbeale68]

I took my car to the dealer yesterday and its now fixed. The mating connector for the hood turn signals was mis-routed and needed to be rerouted.

Sponsored