What did you do to your S550 Mustang today?!

[Carlosa_garcia]

Installed BMR BK054 and CB005. And while I was doing that I plasti dipped my coil covers.

Sponsored

 

[PonyGrrrl]

Try to avoid parking lots that have very little room while backing up. That makes me nervous as hell and I end up parking elsewhere

The parking lot is actually HUGE, it was a very windy evening when it happened and I suspect a shopping cart from Home Depot rolled into it. I park in no mans land!


Sent from my iPhone 6s Plus using Tapatalk

 

[redline727]

Installed BMR BK054 and CB005. And while I was doing that I plasti dipped my coil covers.

Did you drive it yet? I have the CB005 waiting to install it with my performance springs. Debating on the BK054 or vertical links to go with it. I already spent too much money recently. Think I can swing BK054 though. Let me know what you think. Including the install. Thanks.

 

[Asharus]

That's the other thing I'm paranoid about... Flying shopping carts. That's why only the wife's car goes to Home Depot and grocery stores

 

[rvlyssup]

Debating on the BK054 or vertical links to go with it.

If increased NVH is a concern, I suggest using the STEEDA kit instead: http://www.steeda.com/steeda-s550-m...ing-insert-system-urethane-2015-all-555-4439/

 

[Carlosa_garcia]

Did you drive it yet? I have the CB005 waiting to install it with my performance springs. Debating on the BK054 or vertical links to go with it. I already spent too much money recently. Think I can swing BK054 though. Let me know what you think. Including the install. Thanks.

Yes I drove it a little bit. Too much traffic to really test but i definitely feel less wheel hop. But traction is still an issue. I'm on stock Pirelli tires. Didn't really notice much NVH.

Do yourself a favor no matter which way you go, do the diff and cradle kit at the same time. Wouldn't want to have to re drop the rear again. You kinda have to man handle to get the front diff bolts in and then realign the cradle.

Also would have helped to have the exhaust out of the way.

 

[Chameleon]

Eliminated wheel gap on bc coils

Looks really good [MENTION=18028]The Problem[/MENTION]!

 

[Gdyup50]

Couple more items from today.....

For my emblems....

For my state of mind, waiting on rear cam...

 

[birdog]

My CAI and Tune from Steeda came in today. It's a gift from Santa so I'm gonna have to wait a bit to get it on. :-(

 

[Sinister]

Ya I just can't decide if I like this or not....just looks out of place somehow...not sure what it is..

Never cared for it. Maybe with the full package on a car on the track.

 

[ETCH]

I installed 1" spacers on really like the look...

 

[Twin Turbo]

Looks superb


It's amazing the difference an inch makes.....or so my wife says

 

[altjx]

Dropping it off at the repair shop so they can fix the keyless features on the passenger door handle. They repaired some scratches on the passenger door a month ago, while removing the door handle in the process. A few days ago I realized I couldn't unlock the passenger door by putting my hand inside of the handle and couldn't even lock the car by tapping the top of the handle either.

They're estimating it'll take a full day, possibly two.

I just got my Corsa xtremes in yesterday so I'm not happy about dropping this thing off anywhere for a full day. If I knew how to fix this myself, I'd do it even though they screwed it up.

Sent from my Nexus 6 using Tapatalk

 

[svtfever]

steeda intake and tune, jms pedalmax. roush vents, steeda jacking rails, redline hood struts

 

[Martman GT]

Well, I actually did this yesterday but... Installed the wheels I got from LMR's black Friday sale. Wheels, lugs, and shipping for $775. 20x8.5/10 and my DWS 06's 275/35's. Will probably go wider in back when the rears ware out.

Sponsored