ATTFighter
Well-Known Member
- Thread starter
- #1
Hey, had my Paxton Novi 2200sl installed this past week at Power by the hour in Boynton Beach, FL. It was dyno tuned by Ken with Lund Racing. I believe it's one of the first kits installed and tuned in person. After he dyno tuned it, he also drove it on the street to fine tune drive ability.
I also had a one piece driveshaft installed, McLeod rxt clutch, 1400hp halfshafts. Below are install pictures and dyno graph. Hood has no clearance issues with insulator removed. The guys at pbh fabbed up a custom cai for me too as you can see. The kit is awesome and looks really good.
I think the FMIC looks awesome with the Lethal Grill Delete kit as well.
For those interested here is my full mod sheet...
2015 5.0L Ti-VCT V8 Mustang GT Premium Fastback 6-Speed Manual Transmission
Engine
Paxton Novi 2200SL (Polished)
ID 1000 Injectors
Max Flow Boost-a-pump
3.6 Pulley
Brisk 1 Heat Range Colder Plugs
Max-Flow Race BOV (Black)
170 Degree Thermostat
Upgraded T-Bolt Clamps
UPR Oil Separator
Drivetrain
MGW Race-Spec Shifter
DSS One-Piece Driveshaft
McLeod RXT Twin-Disc Clutch
McLeod Steel Flywheel
ARP Fly-Wheel Bolts
JPC Steel-Braided Clutch Line
Exhaust
Stainless Work 1 7/8 Off-Road Long-tube Headers
Stainless Works H-Pipe Cat-back System
Suspension
DSS 1400 HP Half-Shafts
Viking Rear Double Adjustable Shocks
Steeda Progressive Sport Springs
Steeda Strut Tower Brace
Steeda Adjustable Urethane Differential Bushing Inserts
Steeda G-Trac Brace
BMR Cradle Bushing Lockout Kit
BMR Front and Rear Sway Bars with Bushing
BMR End Links
BMR Adjustable Toe Rods
BMR Rear Spherical Lower Control Arm Vertical Links
Tuning
Ken with Lund Racing Custom Dyno Tune
Lund N-Gauge
Appearance
Diode Dynamics Complete Lightning Kit
Lethal Performance Grill Delete Kit
UPR Under-Hood Billet Accessories
Gloss Black Vinyl Hood Wrap
I also had a one piece driveshaft installed, McLeod rxt clutch, 1400hp halfshafts. Below are install pictures and dyno graph. Hood has no clearance issues with insulator removed. The guys at pbh fabbed up a custom cai for me too as you can see. The kit is awesome and looks really good.
I think the FMIC looks awesome with the Lethal Grill Delete kit as well.
For those interested here is my full mod sheet...
2015 5.0L Ti-VCT V8 Mustang GT Premium Fastback 6-Speed Manual Transmission
Engine
Paxton Novi 2200SL (Polished)
ID 1000 Injectors
Max Flow Boost-a-pump
3.6 Pulley
Brisk 1 Heat Range Colder Plugs
Max-Flow Race BOV (Black)
170 Degree Thermostat
Upgraded T-Bolt Clamps
UPR Oil Separator
Drivetrain
MGW Race-Spec Shifter
DSS One-Piece Driveshaft
McLeod RXT Twin-Disc Clutch
McLeod Steel Flywheel
ARP Fly-Wheel Bolts
JPC Steel-Braided Clutch Line
Exhaust
Stainless Work 1 7/8 Off-Road Long-tube Headers
Stainless Works H-Pipe Cat-back System
Suspension
DSS 1400 HP Half-Shafts
Viking Rear Double Adjustable Shocks
Steeda Progressive Sport Springs
Steeda Strut Tower Brace
Steeda Adjustable Urethane Differential Bushing Inserts
Steeda G-Trac Brace
BMR Cradle Bushing Lockout Kit
BMR Front and Rear Sway Bars with Bushing
BMR End Links
BMR Adjustable Toe Rods
BMR Rear Spherical Lower Control Arm Vertical Links
Tuning
Ken with Lund Racing Custom Dyno Tune
Lund N-Gauge
Appearance
Diode Dynamics Complete Lightning Kit
Lethal Performance Grill Delete Kit
UPR Under-Hood Billet Accessories
Gloss Black Vinyl Hood Wrap
Sponsored
Last edited: