19x11 PP wheels?

[z06psi]

Anyone heard of anybody producing some? I am aware of the 19x10s but I need more.

Sponsored

 

[bluebeastsrt]

Check this sight out. A few guys over on Camaro5 had this done and they were happy with the work.

http://www.weldcraftwheels.com/

 

[z06psi]

Yeah I have seen his work and it's good. I think a wheel maker would make a killing off of a concave clone in 11" for the rear. The PP wheels are not bad but need to be wider in the rear.

 

[Schu]

why stop at 11"...

 

[z06psi]

11 is the biggest and still fit flush.

Sent from my SM-N910V using Tapatalk

 

[VertMustang98GT]

11 is the biggest and still fit flush.

Sent from my SM-N910V using Tapatalk

I'm getting my OEM rear PP wheels widened currently to 19x11.

I will follow up as it progresses.

 

[z06psi]

I'm getting my OEM rear PP wheels widened currently to 19x11.

I will follow up as it progresses.

By the company I listed above?

Sent from my SM-N910V using Tapatalk

 

[VertMustang98GT]

By the company I listed above?

Sent from my SM-N910V using Tapatalk

Nope.

Wheel Medic in Columbus, Ohio.

 

[Schu]

I am curious about your results.... I do think the oem gtpp wheels are extremely nice, aesthetically.

 

[VertMustang98GT]

I am curious about your results.... I do think the oem gtpp wheels are extremely nice, aesthetically.

As do I and this is about 1/2 the price of a very nice set of aftermarket wheels plus it's functional (yes I know it's only rears).

Function is the reason I went this route.

I'll always have my stock wheels to revert back too as well in case I decide I want to go another route.

 

[GTP]

Anyone heard of anybody producing some? I am aware of the 19x10s but I need more.

What tires have you found that will fit 11" properly?

 

[Barrel]

Stock rims are so freaking heavy, though.

 

[Need4SpeedMotors]

Stock rims are so freaking heavy, though.

hell ya they are, smh

 

[z06psi]

What tires have you found that will fit 11" properly?

305 or 315s is what I normally run on a 11" wheel.

 

[GTP]

305 or 315s is what I normally run on a 11" wheel.

I am asking for the full size description, bc I can't find much selection.
I did find 325/30 (675mm diameter), but that's about it.

Sponsored