Gauges…. Let me see your setup!

[16RPG_Turbo]

Without the nGauge any more it bothers me a can only see a limited amount of information. Especially during tuning.

Can you show me your gauge setup, what gauges you have and why you decided on those specific gauges. Why that brand and why that information.

Sponsored

 

[GR1MxREAPER]

Love my aeroforce dual gauge setup. Looks awesome in the stock PP center spot also.

 

[1 old racer]

Track prep old school style and info. GT350 center( oil temp and oil pressure) and a 2012 boss gauge cluster, housing AutoMeter SportComp: water, trans, and diff temps gauges.

 

[NGOT8R]

I‘m keeping my nGauge, so I added the eboost2 controller. Although I’ll need to purchase a new tuning device when I’m ready to tune the car, my plan is to tune, unplug the new device and continue using the nGauge to monitor and log info.

 

[16RPG_Turbo]

Nice, was it pretty easy to mount in that location? What all are they able to read?

Love my aeroforce dual gauge setup. Looks awesome in the stock PP center spot also.

 

[16RPG_Turbo]

I swapped my track pack gauges for the ecoboost so I could see positive pressure. But I was thinking about something centered on the dash like what you’ve done.

Track prep old school style and info. GT350 center( oil temp and oil pressure) and a 2012 boss gauge cluster, housing AutoMeter SportComp: water, trans, and diff temps gauges.

 

[16RPG_Turbo]

I’m using an RTD4 now for tuning. My nGuage took a shit on me. But I’m going to get another one for the gauges and do the same as you’re saying.

I have an AMS2000 now in the center console. How is it having all the center A/C taken up in the summer?

I‘m keeping my nGauge, so I added the eboost2 controller. Although I’ll need to purchase a new tuning device when I’m ready to tune the car, my plan is to tune, unplug the new device and continue using the nGauge to monitor and log info.

 

[NGOT8R]

I’m using an RTD4 now for tuning. My nGuage took a shit on me. But I’m going to get another one for the gauges and do the same as you’re saying.

I have an AMS2000 now in the center console. How is it having all the center A/C taken up in the summer?

AC worked great with one vent before, but now I have deleted AC altogether to facilitate the turbo install. I imagine if I still had AC, it would still work just fine. You’ll still have your side and floor vents, so you’d be good.

 

[GR1MxREAPER]

Nice, was it pretty easy to mount in that location? What all are they able to read?

They make a bracket that mounts behind those openings and holds the gauges. It plugs into the OBD so it can get any info that a ngauge or any OBD gauge can get basically. They even make adapters and other things you can plug in to get other things that OBD doesn’t read like boost, or ethanol %, or mechanical gauges if you want etc.. the gauges work great and look amazing. Plus it’s not in an air duct getting hot or cold all the time. Always hated losing a vent in the summer with the reduced airflow out of the ngauge afapter. No one supports that gauge anymore anyways so no point to over pay for a jail broken one to use as a monitor

 

[Slow Yote]

Love my aeroforce dual gauge setup. Looks awesome in the stock PP center spot also.

I realllyyyy like those.

 

[GR1MxREAPER]

I realllyyyy like those.

Thanks. Yeah I really like them. You can have 2 points or 4 or even 8 per gauge.

 

[ammoman]

I had an Aeroforce gauge previously and really liked it! But my aging eyes struggled reading the values while driving at speed. So I had 3 custom gauges made by Sheedhut to match the factory PP gauges. Much easier for me to glance over and see where the needles are. (had the Aeroforce reprogrammed for my Mini Cooper where things don't happen as fast)

 

[16RPG_Turbo]

OK, straight race car. The heat and humidity in Houston is just too much for me to run without A/C.

AC worked great with one vent before, but now I have deleted AC altogether to facilitate the turbo install. I imagine if I still had AC, it would still work just fine. You’ll still have your side and floor vents, so you’d be good.

 

[NGOT8R]

I had planned on keeping the AC when I began the install, but there was just no way that was going to work out for me with the BL Fab kit. I had to do what I had to do to facilitate the install.

 

[16RPG_Turbo]

Winning over everything. Love it.

I had planned on keeping the AC when I began the install, but there was just no way that was going to work out for me with the BL Fab kit. I had to do what I had to do to facilitate the install.

Sponsored