Sponsored
Craig Brown
Well-Known Member
Really nice shop. Mine is a hobby shop by comparison. But it gives me great pleasure and satisfaction to chuck up raw material and make something in my mind come to life. When working on a project that requires a special tool, I just go make it, very rewarding. Yes, I could sometimes get the tool from China cheaper, but not better.
fiveoboy01
Well-Known Member
- Joined
- May 8, 2017
- Threads
- 13
- Messages
- 640
- Reaction score
- 614
- Location
- Madison, WI
- Vehicle(s)
- 2017 LB GT 400A
Got a couple more things done today.
Swapped the front sway bar with a Steeda Unit.
Observations, the Steeda bar is about 1/8" larger in diameter and the bushings are not bonded to the sway bar like the Ford one(which is thoroughly retarded. How is it supposed to pivot freely? Total derp).
Minor swearing removing and installing, probably would have been slightly easier with the car up in the air further... but I managed anyways.
Also swapped the studs on my front hubs to longer ARP units for the incoming spacers from Apex which will be used with my new wheels.
Swapped the front sway bar with a Steeda Unit.
Observations, the Steeda bar is about 1/8" larger in diameter and the bushings are not bonded to the sway bar like the Ford one(which is thoroughly retarded. How is it supposed to pivot freely? Total derp).
Minor swearing removing and installing, probably would have been slightly easier with the car up in the air further... but I managed anyways.
Also swapped the studs on my front hubs to longer ARP units for the incoming spacers from Apex which will be used with my new wheels.
DonnieO
Well-Known Member
It's some good therapy! That's how it started for me. Then it just got out of hand. You end up with more vise then you need and a stupid forklift
Craig Brown
Well-Known Member
LOL never got the forklift. But I do have a 1948 Ford tractor with a frontend loader.
Sponsored
Craig Brown
Well-Known Member
That's the truth. Like rotary table, indexing head. tilting 360 degrees vise. If I had CNC equipment, I wouldn't need this stuff. I don't mind it allows me to get the job done.
Snakebyte
Well-Known Member
- Joined
- Jun 26, 2020
- Threads
- 6
- Messages
- 1,084
- Reaction score
- 1,255
- Location
- West Central Florida
- First Name
- Nathan
- Vehicle(s)
- 2019 Mustang GT Convertible
Fabricated/installed carbon fiber console cubby cover and L-R knee pads to match CF console Christmas gift that wife got me from Trufiber.
Snakebyte
Well-Known Member
- Joined
- Jun 26, 2020
- Threads
- 6
- Messages
- 1,084
- Reaction score
- 1,255
- Location
- West Central Florida
- First Name
- Nathan
- Vehicle(s)
- 2019 Mustang GT Convertible
Had rear camera inspection completed per recall. Dealership changed out camera as a result.
The Spider House
Well-Known Member
- Joined
- May 10, 2025
- Threads
- 18
- Messages
- 365
- Reaction score
- 685
- Location
- Lancashire
- First Name
- Phil
- Vehicle(s)
- Ford Mustang Mach 1
Wait, what, back up.....literally
Sponsored
MAGS1
Well-Known Member
- Joined
- Mar 6, 2020
- Threads
- 96
- Messages
- 11,417
- Reaction score
- 18,722
- Location
- Somewhere in Middle America
- First Name
- Mark
- Vehicle(s)
- 2022 Mustang GT
Mine is at the dealership as we speak. Started doing some weird stuff yesterday, I speculated that the battery was starting to go. Sure enough, it failed when they tested it, so new battery is going in. Getting an oil change as long as it’s there as well
MAGS1
Well-Known Member
- Joined
- Mar 6, 2020
- Threads
- 96
- Messages
- 11,417
- Reaction score
- 18,722
- Location
- Somewhere in Middle America
- First Name
- Mark
- Vehicle(s)
- 2022 Mustang GT
Picked up my car a little while ago. They were able to duplicate the issues I was having and as I suspected, the battery failed the test. New battery in, none of the issues I had came so it’s good to go. They did also run some tests on the electrical system just to make sure there was nothing else going on. Nope, all good. Got a little over 3 years out of the battery, I honestly don’t expect much longer than that these days with all the electronics in these cars. At least with the lead acid batteries.
BlkMach10510
Well-Known Member
Batteries and these cars, lol.
Craig Brown
Well-Known Member
I get six years out of a Motor craft battery.
Sponsored