Coyote Twin Turbo builders needed!

[Nawsad123]

2017 GT looking for a shop / performance package builder to help build me out a twin turbo 1000+ street car. Currently on a vortech v3 si and an alluminator 9.5:1 compression motor. Looking to sleeve the block and do a 'refresh' of internals. Any shops that come into mind?

I can think of a few, but im sure theres more - suggestions wanted

HellHorse Performance
Aldo Welds
Fat fab (+60k....)
Midnight performance
Palm Beach ?

Sponsored

 

[SnowFox]

What state are you in?

 

[Nawsad123]

Washington - but doesnt matter if I need to ship

 

[NGOT8R]

Are you set on running twins? If not, take a look at BL Fabrications. They make a very nice kit.

 

[GL95]

Are you set on running twins? If not, take a look at BL Fabrications. They make a very nice kit.

Single turbo sounds like a terrible idea

 

[Nawsad123]

Need a street / highway setup - would prolly be against a big single

 

[wazslow]

Go with a Hellion or Aldo Welds twin turbo low mount kit. It all fits and works. Single turbo on these small motors is not a great idea unless it's an all out race car with a loose convertor.

 

[Nawsad123]

Go with a Hellion or Aldo Welds twin turbo low mount kit. It all fits and works. Single turbo on these small motors is not a great idea unless it's an all out race car with a loose convertor.

Agreed - since aldo welds does motor work as well - they are one of the few folks ive sent an inquiry to

 

[NGOT8R]

Single turbo sounds like a terrible idea

Maybe, maybe not. I’ll certainly report back with my findings once I’ve installed mine and tested it for street duty.

 

[Nawsad123]

Maybe, maybe not. I’ll certainly report back with my findings once I’ve installed mine and tested it for street duty.

Please do!

 

[The Watchman]

I would think there are some great speed shops out on the West coast where you are.

But, there are several here in the Midwest which are reasonably priced and have proven 1000+ hp TT setups on track and street.

Finish Line Performance in Loveland, OH
Brenspeed in Northern Indiana
HPR Performance in Tennessee

I know the guys from these shops and they are great people who love cars themselves. Good Luck

Cheers!

 

[Nawsad123]

Have heard of Brenspeed - will be adding to my list!

 

[The Watchman]

Have heard of Brenspeed - will be adding to my list!

Brenspeed is great.

However, my personal shop is Finish Line. Bryan is a wizard. Also, when/if you need to buy parts, reach out to @beefcake and he will get you squared away.

Beefcake and Finish Line are connected. Best pricing and customer service for both parts and installation.

Cheers!

 

[beefcake]

2017 GT looking for a shop / performance package builder to help build me out a twin turbo 1000+ street car. Currently on a vortech v3 si and an alluminator 9.5:1 compression motor. Looking to sleeve the block and do a 'refresh' of internals. Any shops that come into mind?

I can think of a few, but im sure theres more - suggestions wanted

HellHorse Performance
Aldo Welds
Fat fab (+60k....)
Midnight performance
Palm Beach ?

My business partner / crew chief is Brian at Finishline Performance. He can handle all the install needs and i can help with the parts. We have guys from all over the US, Canada, and Mexico that ship cars to us to have done.

For a tt set up, i would recommend the hellion or aldo kit. if you went single i would do bl fab. they all make great kits. feel free to DM or call with any questions. 855-827-7223

 

[wazslow]

Are you set on running twins? If not, take a look at BL Fabrications. They make a very nice kit.

I think your making a big mistake going with a big single on a stick car. You seem to like going against conventional wisdom and doing your own thing which is great. I just hope your not disappointed after spending another $15k.

Sponsored