S550 to S650 parts swap and interchangeability possibilities

[Cobra Jet]

@WolfMxbee told you you expedited a call. These showed up today from dealer.

Hopefully will have update in next month

Did those come in black like in the image or have they been painted?

Sponsored

 

[MACHtobers Very Own]

Did those come in black like in the image or have they been painted?

Come in black. They are the black horse handles that are oem black.

 

[Mike Pfeifer]

Come in black. They are the black horse handles that are oem black.

So they look like very very dark metallic, as opposed to just black. Can you confirm? Also, part numbers and prices?

 

[MACHtobers Very Own]

So they look like very very dark metallic, as opposed to just black. Can you confirm? Also, part numbers and prices?

this was a quick pic from my guy at dealership. I'll grab a detailed pic and info soon to report back

 

[MACHtobers Very Own]

So they look like very very dark metallic, as opposed to just black. Can you confirm? Also, part numbers and prices?

This is what I was given. They ordered for me. I tried googling and you get a variety of prices.

I believe for me it was 83 for each handle and 32 for each grip. 230 total. I will get pics as soon as I can but might be a few days. Also for the group this thread I believe confirms that the grip handles/door pulls require some modification.

Grip Handle - Ford (PR3Z-6322634-BA)
Grip Handle - Ford (PR3Z-6322635-BA)
Handle, Inside - Ford (PR3Z-6322600-CA)
Handle, Inside - Ford (PR3Z-6322601-DB)

 

[WolfMxbee]

This is what I was given. They ordered for me. I tried googling and you get a variety of prices.

I believe for me it was 83 for each handle and 32 for each grip. 230 total. I will get pics as soon as I can but might be a few days. Also for the group this thread I believe confirms that the grip handles/door pulls require some modification.

Grip Handle - Ford (PR3Z-6322634-BA)
Grip Handle - Ford (PR3Z-6322635-BA)
Handle, Inside - Ford (PR3Z-6322600-CA)
Handle, Inside - Ford (PR3Z-6322601-DB)

Yea just the extra ear that comes on them has to be snipped or cut off

 

[WolfMxbee]

I was actually about to place an order on the dark horse black door pulls and handles but I ended up using that budget to go back to my original base oem fake carbon texture dash trim and paint my handles and pulls black, I had to let them cure for a day or 2 cause taking apart the handle was a pain but here's a how to : there is a spring you have to pull out first in the picture, just comes straight out and then next there are 2 tabs you have to pry up slightly because there are indents in the handles. Next pull the handle in the opening position as the tabs have slots that only remove one way. I did it the hard way by removing the handle with the spring which added more unnecessary tension. Also door new door handle looks like I messed up the paint but it's just the grease from tackling the handle back in

 

[WolfMxbee]

Did my A/C vents too and here is what my interior looks like going from the Brushed Silver Dash Trim I had to replace my Base black trim and now back to the old black trim again lol

Here's some pics of my S550 that I haven't updated on here in a while and yes it's different and background--> I owned lots of jdm and mustangs so made mated both passions together hence the JDM Inspired Ecoboost

 

[shogun32]

hence the JDM Inspired Ecoboost

You found JDM wheels that fit over the 6 pots?

 

[WolfMxbee]

You found JDM wheels that fit over the 6 pots?

These are the 4 piston but I still have some room however I believe you may have to go to 20's, I am going to be upgrading my brakes again to the S650 6 Pistons

 

[WolfMxbee]

Incase anyone wants to know how to paint the headlight switch chrome trim ring, you can use your nails and slowly work evenly around the ring and it'll pull off, there's no clips, just held on with resistance

 

[MACHtobers Very Own]

I should be attempting my Install next weekend. Will keep group posted!! I also want to do the vent surrounds but might just do covers for those.

 

[WolfMxbee]

update : got all my trim painted

 

[WolfMxbee]

I finished my driver side door panel now.. again, added some ambient lighting to the door pocket and wrapped the panel behind the handle in matte carbon to match the dash

Currently passenger side is apart, I finished the wiring for the lights and now awaiting the paint to dry on the handle and pull handles

 

[Cobra Jet]

I finished my driver side door panel now.. again, added some ambient lighting to the door pocket and wrapped the panel behind the handle in matte carbon to match the dash

Currently passenger side is apart, I finished the wiring for the lights and now awaiting the paint to dry on the handle and pull handles

The ambient lighting in the pocket looks good!

How did you do it, did you just tap another door handle LED into the existing wiring so the pocket would coincide with the door handle light?

Sponsored