What can we do for You?

[Mr. Met]

My Apologies JJ my response was in error, I have learned that our dealership does not participate in the smart pass program and this needs to be sourced from your local dealer as activation and registration is required. Apparently it's not as simple as plugging it in and signing up online.

Thank you,
Benny

I thought I had read it needed to be installed and activated by a dealer. That's too bad you guys dont do it, I was going to be there for an alignment and was hoping to get it.

Also wanted to know if you had this FR3Z-63016A52-A in stock?

Sponsored

 

[LevittownFordParts]

I thought I had read it needed to be installed and activated by a dealer. That's too bad you guys dont do it, I was going to be there for an alignment and was hoping to get it.

Also wanted to know if you had this FR3Z-63016A52-A in stock?

You can inquire with the service department and perhaps they will begin offering it with enough demand from customers. FR3Z-63016A52-A is on a slight backorder into February at this time. If you would like to pre-order it you can do so here https://parts.levittownfordparts.com/oem-parts/ford-extension-panel-fr3z63016a52a

Thanks,
Benny

 

[JamesinLittleSilver]

Hello Benny could I get a discount code please I need to order a few assorted things.
Thanks in advance.
James

 

[LevittownFordParts]

PM sent, Thanks James

-Benny

 

[JamesinLittleSilver]

Thanks!!!

 

[Jeff's FRC]

Is the 2019 gt350 spoiler listed yet?

 

[LevittownFordParts]

No I am sorry but we do not have the part # just yet

-Benny

 

[Amaury]

Hello Benny, can I get the parts number and quote shipped to 00926 of the PP2 front lip, and the full set of wheels? Someone told me that the PP1 front lip doesn't have all the holes needed to mount the lower PP2 lip so if true, add the primary lip also. If there is anything else missing, add it.

 

[LevittownFordParts]

Hello Benny, can I get the parts number and quote shipped to 00926 of the PP2 front lip, and the full set of wheels? Someone told me that the PP1 front lip doesn't have all the holes needed to mount the lower PP2 lip so if true, add the primary lip also. If there is anything else missing, add it.

Hello,
Please message me your email address so I can quote you. The PP2 upper splitter is not the same as the PP1 so I will quote both. Just confirm your looking for the PP2 wheels as well?

Thank you,
Benny

 

[Oxford white 10r80 gt]

I’m in need of a new overhead console for my 2018 gt I broke the plastic clip removing it to install led lights is all my current stuff transferable? I believe I found the part number
JR3Z-63519A70-GA

 

[LevittownFordParts]

Hi Nick,

Please message me your VIN

Thanks,
Benny

 

[zahimrad]

do you have M-5035-MK? I'm looking to replace my rear subframe/cradle.

 

[LevittownFordParts]

Hi Zahi,

That part number from FP has been discontinued and is no longer available but we can get you the OE replacement part number. Can you please message me your VIN and I will get you a price.

Thanks,
Benny

 

[Mr. Met]

You can inquire with the service department and perhaps they will begin offering it with enough demand from customers. FR3Z-63016A52-A is on a slight backorder into February at this time. If you would like to pre-order it you can do so here https://parts.levittownfordparts.com/oem-parts/ford-extension-panel-fr3z63016a52a

Thanks,
Benny

Hey

Wanted to check if it was in stock yet? I never ordered it because I wanted to pick it up anyway.

Thanks

 

[LevittownFordParts]

Hey

Wanted to check if it was in stock yet? I never ordered it because I wanted to pick it up anyway.

Thanks

Hi JJ,

Yes Ford now has stock at their MI warehouse.

Thank you,
Benny

Sponsored