What did you do to your S550 Mustang today?!

[Bybcous]

Began dying the seats. One down, three to go.

I used ColorBond in "Crimson Red"

https://www.amazon.com/gp/product/B00G6IHTYA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Will that over spray come off?

Sponsored

 

[VooDooDaddy]

Will that over spray come off?

Come off of what??

 

[Bybcous]

Come off of what??

It bleeds over the seam on the seat in some spots.

 

[VooDooDaddy]

It bleeds over the seam on the seat in some spots.

That's not "over-spray", it is my sloppy masking job. It is just like the rest of the seat, once dyed, the color will NOT come off.

Overall I am extremely happy with this color change. I couldn't find an Ingot Silver Mustang with red leather interior, and having the seats re-covered was going to cost me well over $1000. By the time I'm done with all four seats, I'll have about $100 in material costs.

I'll be starting a thread on this sometime tomorrow, detailing how I accomplished this color change to my leather seats.

 

[Bybcous]

That's not "over-spray", it is my sloppy masking job. It is just like the rest of the seat, once dyed, the color will NOT come off.

Overall I am extremely happy with this color change. I couldn't find an Ingot Silver Mustang with red leather interior, and having the seats re-covered was going to cost me well over $1000. By the time I'm done with all four seats, I'll have about $100 in material costs.

I'll be starting a thread on this sometime tomorrow, detailing how I accomplished this color change to my leather seats.

Can you include up close pictures of where the seams seem to blend over at. I also wanted a red interior but couldnt find one. Interested.

 

[VooDooDaddy]

Can you include up close pictures of where the seams seem to blend over at. I also wanted a red interior but couldnt find one. Interested.

I just created a new thread in the DIY section detailing how I re-dyed my leather seats, for those that want to know.

https://www.mustang6g.com/forums/threads/dying-leather-seats-different-color.114183/

 

[Rock&Roll]

Checked my tire pressure and all the tires where around 25-27 lbs.

So I set them all to 32Lbs and went for a ride up in the Mountains


Felt kinda sorry for you guys that don't drive your cars in the winter ....................

.
.

.

.
for about a minute

 

[Mikeextrafast]

Did a thing..
Thanks to Jake at Vibe Motorsports!

What springs ?

 

[JohnBoyNC]

A little interior cosmod.

 

[serpent]

Checked my tire pressure and all the tires where around 25-27 lbs.

So I set them all to 32Lbs and went for a ride up in the Mountains


Felt kinda sorry for you guys that don't drive your cars in the winter ....................

.
.

.

.
for about a minute

Same here except the Flat Plains of Long Island.

 

[Hudman]

First oil change at 1540 miles. Went with Motorcraft 5W20 Full Synthetic oil.

 

[1bad66]

What springs ?

Steeda Progressives

 

[furiousfuria]

Installed the 2018 intake manifold and PBD tune yesterday! When people say it feels like a new car now I know what they mean, so much fun to drive. Also used a dremel to cut out the MAF inlet tube on my Airaid intake to make the opening larger and give more airflow (the tune accounted for that). Still gotta datalog for any revisions, but loving it so far! BTW, new intake isn't ported yet.

Ran into 4 CEL codes this morning when I started it up, all have to do with the IRMCs it looks like. I locked them out, will have to let PBD know

 

[Dory]

I went to the gym and parked my lemon next to an orange.

Sponsored