What did you do to your S550 Mustang today?!

[randy_tho]

Did you do it twice? Lol

Also that's really cool if I get what you did. Using the side mirror projector part to project to the rear seat delete?

Sponsored

 

[Sig556]

I performed my first oil change today at 5000 miles and added a Napa Gold 7502 filter. I used Mobil 1 5W-20 Full Synthetic. My oil was BLACK I'm glad I dumped it at 5000. I would never go 10000 with oil this dirty. As a side note the Napa 7502 is made by Wix and is 1 1/2" longer which makes things just a tad better. I love the BMR Jacking Rails they are beefy as hell and makes tire rotation a snap. Make sure to open the drain plug slowly and hold it to avoid a mess. When that plug comes out the oil is express.

 

[HoosierDaddy]

@NoVaGT
I just made my own exhaust system last night... so, I can't see a CAI being tricky...however I would say that my experience might be a tiny bit higher than yours...LOL! So, I should not judge. Enjoy the JLT, I love mine!

Actually judging is good IF you stay silent about it. That way you feel better but nobody feels worse. Net increase in world happiness. I do my part all the time.

 

[scottycameron]

Installed my Steeda progressive springs today. The "2 hour" job took me 6.5. Ugh first spring swap since my IS300 back in 2004, forgot what a pain it is.

 

[TeamDenno]

Shit how is the poke on the rears? I have those exact wheels and can only just get 305/35s on the rear

Michelin PS4s in anything bigger than 295 in 19s are near impossible to get hold of in Oz too. A mate had just picked up his P51's in 19s, and the tyre dealer could not source rubber bigger than 295's for the rest

 

[Blue Moon]

Clutch pedal extension. Easy 5 minute install, and now I can sit comfortably and push the clutch to the floor without feeling like I'm stretching or twisting in my seat.

 

[Joe B.]

Installed the Curt trailer hitch. Working alone so I made up a lifting jig. Having the Roush axle backs off the car helped, too.

 

[tj@steeda]

Great choices - thanks for sharing, you will be very happy

 

[tj@steeda]

Installed my Steeda progressive springs today. The "2 hour" job took me 6.5. Ugh first spring swap since my IS300 back in 2004, forgot what a pain it is.

Results look great!

 

[2morrow]

A few more things and I'll have the complete Steeda life, lol.



Let me know how you like that new shifter. Been thinking about that for some time now.

 

[Stage_3]

Looks great bro!

 

[o-man]

replaced rear pads and rotors that I destroyed at VIR a couple weekends ago with these from Powerstop,

Why Ford feels the need to use blue thread locker on the caliper bolts is crazy. Makes the job quite tough

 

[Rev'n Step]

Just took a picture of the way it sits!

2018-09-23_06-42-32

 

[BlueThunder]

Gave it a much-needed bath (damn these Brembos make the front wheels dirty!) and installed a few things this weekend:

~Velossa Big Mouths on both sides (mostly for the cosmetics but if they help down the line when I tune it, fantastic).
~Black 5.0 emblems
~Fog/blinker splitters; I wasn't too sure on these. Wrapped them in Satin Black, I like that they add something to that corner-pocket area, but they might be a little big along with the 2 inch alignment piece sticking out. Gonna try them out for a while and see if they grow on me.
~Steeda H-Pipe going on this week.

Sponsored