Velossa big mouth

[Manders Mustang]

Getting the ram air intakes out was easier than the initial install. I only removed them to install the light kit.
.

The light kit is cool, but u deffo need both sides. works well with the DD RGBW lights too // the RTR light grilles

Sponsored

 

[christianUK]

Velossa Bigmouth won't work with RTR grilles. I speak from experience

 

[Manders Mustang]

Velossa Bigmouth won't work with RTR grilles. I speak from experience

Ah gotcha, didn't know if it might with the Ikon fake rtr grilles

 

[MustangGuy]

I'm going to be installing the GT350 CAI. Can the Velossa Bigmouth be installed at the same time from the inside without removing the bumper cover?

 

[MustangGuy]

[MENTION=27367]MustangGuy[/MENTION]If you plan to open the grill with a tool from the front it would be possible to get the task done. The big mouth can be removed / installed without complete removal, (removing all screws and push pins with exception of the belly pan).

If you are going to completely remove the honeycomb portion it would save you some headache to take the bumper cover off.

The intake kit install is located in my journal here: https://www.mustang6g.com/forums/showthread.php?p=2074920#post2074920

Later the light kit was installed here:https://www.mustang6g.com/forums/showthread.php?p=2183141#post2183141

Hope that helps. :cheers:

That does help. I figured I would have to take off the belly pan and maybe the radiator cover. I just have to figure out a clean way to trim out the grill. I have a Custom Car Grills metal mesh grill. Keep up the great work. Love your mods. Thanks

 

[envyyvne]

Velossa Bigmouth won't work with RTR grilles. I speak from experience

You need to buy the one designed for the RTR grilles, I know they fit, I have installed it on mine.

 

[GR11M]

You definitely can't install the vbm from the inside.
If you're removing the grill in front of the vbm, it's easier with the bumper off as you can cut from behind.
The bumper isn't difficult to remove, how ever there is 1 screw inside the passenger side wheel arch that is a complete ball ache to remove.

Sponsored