GT 350R WHEEL

[Manders Mustang]

:lol:

I've already got a set fitted, it's replacements that are on the way, couple of the LED's burnt out on the strip. Replaced FOC.

@Manders Mustang , it's a breeze if you get the car on a ramp

Indeed, it was on the ramps(by ramps I mean the ladders in my garage that I reversed onto to get under the car), was more a case of 'where' the wires for the plate lights were, thought they were behind the bumper somewhere. Mind you, I spent about 5 minutes under there just taking pictures to plan my attack on it when the weather betters - clips look a doddle to get on/odd to put the sidelight in, just don't want to do a typical me thing and do the wrong thing when modding :lol:

Sponsored

 

[KevD]

Just waiting for the ransom note from Customs, [MENTION=24141]Sudaf[/MENTION] is fitting mine, I mean assisting me :lol:. Replacement side markers from Diode on their way as well, I might manage to fit them myself

Good call.
Mine boards the boat today

 

[Jimboy2]

@Lone Survivor @Jimboy2 I've got the 'new' variet of DD sidemarkers, as I got sent them over Xmas, look a doddle to connect, just red wire taps and pushing them in, i'll tape over the connections to keep them in place (got both sidemarker and the taps).

Was looking under mark car in the week, any advice on how to get to the "Registration plate" light wiring? Looks like it's a bit of a fiddle to get to.

[MENTION=27322]activeuk[/MENTION] did you manage to get this fitted matey?

Stick a pic up of the connector at the reflector end. That's the shit connector. I got mine over Black Friday so believe they are the new type. They have been fine since install but I'm still not happy with that connector

 

[Jimboy2]

Also the number plate light... not sure on the correct way of removing it. I think I was lucky that I didn't break it to be honest. I had trim tools sticking out of every corner :lol:

 

[Manders Mustang]

Stick a pic up of the connector at the reflector end. That's the shit connector. I got mine over Black Friday so believe they are the new type. They have been fine since install but I'm still not happy with that connector

ah right the bit with the wobbly LED board out the back of it right? :lol: Yeah that looked a bit sh1t to me, I thought an LED light was stuck in there (like a P10 or something). I'll tape over that connection to make sure it doesn't wobble too much, and reduces any water ingress which is Diode Dynamics reason for 'failure' on the lights.

Still not a donkeys what wire im tapping into for the lights to function. :headbonk: (mind you might wanna read the instructions a bit more...)

 

[Jimboy2]

Yeah it will all make sense when you read the instructions. Hardest bit was getting the number plate ligh out.

 

[simonp83]

What's the difference between the standard GT and the 350/r wheels? From the looks, is it purely the flat bottom, a nicer material and the top band?

 

[Ian whu]

I've already got a set fitted, it's replacements that are on the way, couple of the LED's burnt out on the strip. Replaced FOC.

@Manders Mustang , it's a breeze if you get the car on a ramp

i got a set of replacement ones aswel, never fitted them to car yet, doubt i will, soo will be for sale soon

 

[Nookie]

What's the difference between the standard GT and the 350/r wheels? From the looks, is it purely the flat bottom, a nicer material and the top band?

Both have flat bottoms, GT350 has black centre line at the top of the wheel and light grey stitching and uses standard silver bezels, GT350R has red centre line at the top of the wheel and red stitching, and comes with dark silver bezels... if I recall correctly.

 

[Manders Mustang]

Both have flat bottoms, GT350 has black centre line at the top of the wheel and light grey stitching and uses standard silver bezels, GT350R has red centre line at the top of the wheel and red stitching, and comes with dark silver bezels... if I recall correctly.

Bang on.


[MENTION=20439]Jimboy2[/MENTION] looks like i best get reading them !

 

[Sudaf]

Just waiting for the ransom note from Customs, [MENTION=24141]Sudaf[/MENTION] is fitting mine, I mean assisting me :lol:. Replacement side markers from Diode on their way as well, I might manage to fit them myself

No problem at all:cheers:

 

[activeuk]

wheel came today now just getting the time to get it fitted

 

[Manders Mustang]

wheel came today now just getting the time to get it fitted

We want pics ;)!

 

[activeuk]

Here we go

 

[Manders Mustang]

Here we go

Liking them, everytime i see a 350r wheel I want one more and more :/ But my inner OCD wont be able to bring myself to it...

This has me very tempted:
https://carbonplug.com/s550carbon/carbon-fiber-steering-wheel

Sponsored