20x10.5 square Niche Misano aggressive setup

[Paul@PKAUTODESIGN]

They look fantastic
If I could afford another set I would definitely consider these.

These are super affordable.

Sponsored

 

[Pincushin3819]

Can't go wrong with these for the price, I love mine! :cheers:

 

[Terminator2]

Are the et25 any less concave than the et30's?

ET25 is More concave than ET30 by 5mm if wheel width and type is the same.

 

[Paul@PKAUTODESIGN]

ET25 is More concave than ET30 by 5mm if wheel width and type is the same.

Not concave it's just more aggressive

 

[shelbywannabe]

Have to see how I stand after the holidays. I may have to get a set of these !

 

[TURTL3]

I like it. If you slam it on air with that stretch, you'll def get some looks for sure. Should tuck real well with the car all aired out.

Edit: Whoops, didn't realize this thread was 14 pages long haha

 

[Paul@PKAUTODESIGN]

Have to see how I stand after the holidays. I may have to get a set of these !

Treat yourself lol.

I like it. If you slam it on air with that stretch, you'll def get some looks for sure. Should tuck real well with the car all aired out.

Edit: Whoops, didn't realize this thread was 14 pages long haha

Ya its a long thread haha, but on air this would be a nice clean setup.

 

[S550ilver]

Love the wheel for sure, crazey nice. Looks great from a distance, but again too much tire stretch for my licking, but I do like some. 275/35 would look better and with a little camber should slide under the fender. Here are my Niche Vicheza 20x10 40mm offset with 275/35.

CAT PHOTOBOMB!!!!!

 

[shelbywannabe]

Treat yourself lol.



Ya its a long thread haha, but on air this would be a nice clean setup.

I did that when I bought the Forgestars. lol

 

[Paul@PKAUTODESIGN]

I did that when I bought the Forgestars. lol

another one ( in a DJ Khalid voice) lol

CAT PHOTOBOMB!!!!!

Its a growing epidemic too many Cat Photobombs :lol:

 

[5.oh]

305 or bust

 

[Paul@PKAUTODESIGN]

305 or bust

Doable on the 10" but hard to pull on the 10.5"

 

[DeepakGTCS]

Sorry for the bump, but how was the alignment with this setup?

 

[Paul@PKAUTODESIGN]

Sorry for the bump, but how was the alignment with this setup?

Most members that are lowered had them at about -2 to -2.2 degrees

 

[SidewaysMike]

Hey Paul, would a 295/35r20 work on the 20x10.5 30mm in the rear with -1.5 camber? other wise what is the max? 275?

Sponsored