Tial Q blow off valve question?

[Csb1992]

Does anyone know if a company makes a flange that allows you to just bolt the tial on or do you have to cut and weld it on this is for Paxton kit that is

Sponsored

 

[z06psi]

Cut and weld.

 

[BrazukaV8]

I've seen an adapter to make the tial fit on the Paxton bov. But honestly was just easier to cut and weld. Guy charged me 20 bucks and I've never seen such beautiful weld

 

[Csb1992]

Awesome where did you guys pick your blow off valve up I was told to get mine from jpc racing

 

[zaquhree]

I bought my flange and had the old hole widened and cleaned up. Also make sure it is purged as well.

 

[Csb1992]

What do you mean by purged?

 

[beefcake]

you can cut the old flange off, but i think greddy makes an adapter as well

 

[Csb1992]

Really do you know what it's called or have a link would rather not have to cut and weld if I don't have too

 

[Jeff_oddo]

https://www.amazon.com/Torque-Solution-Billet-Adapter-Flange/dp/B00AM92HAK
http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=ATP-TIL-001&Category_Code=BOV

 

[Stevenjasmin]

I used the one from ATP, worked great. No leaks and cleared bumper.

 

[zaquhree]

Purging means they pump gas into the tube so you have no metal dingleberries in your pipe that can come off. Clean up the welds and everything.

 

[Csb1992]

Might try the atp bolt on method if people are saying that works!

 

[Csb1992]

Where did you guys buy your tial q from?

 

[Jeff_oddo]

I'm gonna go with the Tial QR since it should quiet it down a little compared to the Tial Q

 

[Csb1992]

Are you gonna sell your tial q?

Sponsored