S550 Long Tube Header Install Central FL?

[SR56]

Does anyone know a good shop that will install long tubes for a fair price? I'm in the Daytona area, but will travel!

Sponsored

 

[KPSI]

If you want to drive down to me I can do it. I charge 300 to install located in Port Charlotte fl

 

[SR56]

If you want to drive down to me I can do it. I charge 300 to install located in Port Charlotte fl

It's a little bit of a haul right now, but if I can't find anyone a little closer it could work.

What's your expected install time so I can have an idea of what to expect for a trip that way?

Thanks for the reply.

 

[PRG3k]

Ask for Tyler Barnes at Ice Cold Auto Air & Muffler in Orlando. Many Orlando Mustangs go to him.

 

[KPSI]

It's a little bit of a haul right now, but if I can't find anyone a little closer it could work.

What's your expected install time so I can have an idea of what to expect for a trip that way?

Thanks for the reply.

about 4 hrs, but it can be the better part of the day.

 

[FivePointToTheOh]

Collin at Racing Intergrations.

 

[stang305]

If you want to drive down to me I can do it. I charge 300 to install located in Port Charlotte fl

Good price is that at your house or a shop ?

 

[SR56]

Wanted to update this for future searches. I wound up going to Lamotta Performance in Longwood. Jake has been in the Mustang game since the 90's and he does great work. A visit to his shop will quickly tell you you're in the right spot. Mustangs everywhere.

I got a great deal to install my BBK long tubes & midpipe. I also had him cut out the pinched 2 1/4 connector between midpipe and x-pipe and weld in a 3". Basically, the midpipe is now part of the x-pipe and then bolt mounts to the headers.

I won't post the exact price, but it was about half what many shops are charging, even with the cut/weld.

Dropped my car off the night before and it was done by 3 pm next day.

http://www.lamottaperformance.com

 

[gameovergt]

got mine done at Hurricane Performance in Orange Park, FL for $495.00 including taxes. They did a great job!

 

[16Kobra]

Wanted to update this for future searches. I wound up going to Lamotta Performance in Longwood. Jake has been in the Mustang game since the 90's and he does great work. A visit to his shop will quickly tell you you're in the right spot. Mustangs everywhere.

I got a great deal to install my BBK long tubes & midpipe. I also had him cut out the pinched 2 1/4 connector between midpipe and x-pipe and weld in a 3". Basically, the midpipe is now part of the x-pipe and then bolt mounts to the headers.

I won't post the exact price, but it was about half what many shops are charging, even with the cut/weld.

Dropped my car off the night before and it was done by 3 pm next day.

http://www.lamottaperformance.com

Lamotta Performance gets my vote. He does all my work on my 2007 GT500 and 2016 GT350.

Sponsored