What did you do to your S550 Mustang today?!

[Joelang33]

Installed MMD V-Series Spoiler and Roush Heat Extractors! much more aggressive look.

Sponsored

 

[Chameleon]

Installed MMD V-Series Spoiler and Roush Heat Extractors! much more aggressive look.

Looks great!

 

[Gdyup50]

Ordered a GT350 steering wheel from Levittown and Black billet paddle shifters from CJ Pony....

 

[Khyber]

Installed MMD V-Series Spoiler and Roush Heat Extractors! much more aggressive look.

http://postimg.org/image/55stgmldr/

http://postimg.org/image/y7naehj0r/

http://postimg.org/image/3t6fdc5qr/

awesome! love that you choose black!

 

[Moddiction]

Installing these next weekend! Thanks for hooking me with a steeda banner David!

Sent from my SM-G900V using Tapatalk

Is that the G2 green caliper paint? Been thinking of doing mine the G2 green color. Looks good!

 

[DB23]

Good weather here in NJ this weekend and today so gave her an early spring cleaning: washed, waxed (turtle wax ice, 2 coats plus detail spray to finish off), sidewalls n int plastic got 303 aero, seats n leather trim got meguiars cleaner/conditioner.

 

[ponie1992]

Installed my jacking rails.

And, a little touch to the interior.

 

[V8Venom]

Installed CJPP paddle shifter extenders. I haven't driven yet, but so far they feel nice. They are a bit large but give much easier access to the paddle shifters. I also got a custom euro plate for shows. They forgot to send me the frame to mount it, which is why I didn't take a pic of it on the car. Other than that it's pretty nice looking.

 

[JeffreyDJ]

Today I had a few things done at Big Worm Graphix today:

- Changed the gloss red stripe to matte red.
- Had the Diode Dynamics Taillight sequencer and 4th brake installed
- Had all around light tinting installed: Headlights Tint, Taillights Gunsmoke, and the rest all charcoal

I also installed my front Stanginator (the rear I did a few days back). It's a pain getting the little screws on with the grill shutters, but it's doable with a socket extension and a tiny bit of silicon adhesive to hold it in the socket until it gets started.

Below are a few pictures, sorry she's a little dirty.

 

[shelbywannabe]

Today I had a few things done at Big Worm Graphix today:

- Changed the gloss red stripe to matte red.
- Had the Diode Dynamics Taillight sequencer and 4th brake installed
- Had all around light tinting installed: Headlights Tint, Taillights Gunsmoke, and the rest all charcoal

I also installed my front Stanginator (the rear I did a few days back). It's a pain getting the little screws on with the grill shutters, but it's doable with a socket extension and a tiny bit of silicon adhesive to hold it in the socket until it gets started.

Below are a few pictures, sorry she's a little dirty.

I like the hood graphic. Did you design it or are they readily available ?

 

[JeffreyDJ]

I like the hood graphic. Did you design it or are they readily available ?

Check out Big Worm Graphix in the vendor section or at:

http://www.bigwormgraphix.net/Mustang-2015-horseshoe-hood-stripe.htm

The quality is top notch and customer service is amazing. I wouldn't order from anywhere else.

 

[GTP]

How do you like the extensions? Mine are coming Tuesday. They look very bulky not sure if I will like them.

I was surprised how big they were when they came in. Started to understand their price. They need to big in order to make much difference over the OEM paddles. However mine don't work when pressing at the highest spot because that puts a little twist to the OEM lever, thus not actuating the micro switch. But pressing at the upper cutout they work fine.

 

[shelbywannabe]

Check out Big Worm Graphix in the vendor section or at:

http://www.bigwormgraphix.net/Mustang-2015-horseshoe-hood-stripe.htm

The quality is top notch and customer service is amazing. I wouldn't order from anywhere else.

Thanks

 

[V8Venom]

I was surprised how big they were when they came in. Started to understand their price. They need to big in order to make much difference over the OEM paddles. However mine don't work when pressing at the highest spot because that puts a little twist to the OEM lever, thus not actuating the micro switch. But pressing at the upper cutout they work fine.

When I first pressed at the highest spot it twisted the bottom portion off so I just held my hand harder on it to make them stick better. Once I drive I will try it out to see how they work, but it feels like you can still get your hand higher than the stock ones and shift with no problem. They are definitely pricey, glad I bought them for the sale price, don't think I would have otherwise.

 

[plc268]

Bought a DA polisher. Gonna try and get rid of my swirls and water spots soon.

Sponsored