Quad tips

[tyler2k]

Has anyone found quad tips that will fit on mbrp race catback, iv got a base model gt pp so I'm gonna cut the bumper to fit. I'm just curious if anyone has found tips that will clamp or can be welded on

Sponsored

 

[tyler2k]

Would corsa tips work

 

[Chris796]

Probably not right out of the box. Head to you local muffler shop and have them do a custom setup, would probably only cost $50 more.

 

[tyler2k]

Iv got a full shop, i can do the fab work I'm just looking for something that i won't have to butcher the rear valance maybe just cut a few inches on the openings for the tips

 

[Chris796]

The problem is the Corsa, and any other quad tips, were not made for base model bumpers. So modification to the tips, axle back and/or rear valance are unavoidable.

 

[tyler2k]

Yea i figured, I'm just looking for tips that fit kinda central so all that has to be trimmed is a frw inches on the side

 

[Csnow]

Yea i figured, I'm just looking for tips that fit kinda central so all that has to be trimmed is a frw inches on the side

I am looking to do the same thing. I have been reviewing some tips with dimensions trying to see what will work.

 

[kingstang]

Has anyone found quad tips that will fit on mbrp race catback, iv got a base model gt pp so I'm gonna cut the bumper to fit. I'm just curious if anyone has found tips that will clamp or can be welded on

http://www.stangmods.com/Mustang-Quad-4-Inch-Exhaust-Tips-p/3040.htm

 

[Ngtmare]

http://www.stangmods.com/Mustang-Quad-4-Inch-Exhaust-Tips-p/3040.htm

How much work was required to get those to fit like that? Which cat back did you have?

 

[Hinds90]

Looking for those with base rear bumper also.

 

[kingstang]

Looking for those with base rear bumper also.

That is a base bumper with MMD Diffuser.

 

[kingstang]

How much work was required to get those to fit like that? Which cat back did you have?

Hot Knife,Dremel and a Razor with some door molding strip....... This was a Corsa Sport Axle back with Ford Racing X-Pipe and ........I Also had the MMD Gen 1 Diffuser which failed.....

 

[Hinds90]

Have any pictures of fitting the mind diffuser?

 

[kingstang]

Have any pictures of fitting the mind diffuser?

I don't personally but follow this thread for all you would need to know about the diffuser.

http://www.mustang6g.com/forums/showthread.php?t=58057&highlight=mmd+diffuser

Sponsored