GT Pony
Well-Known Member
- Joined
- Mar 13, 2015
- Threads
- 77
- Messages
- 9,236
- Reaction score
- 4,281
- Location
- Pacific NW
- Vehicle(s)
- 2015 GT Premium, Black w/Saddle, 19s, NAV
You didn't come out and say it, but I'm assuming you have Darko66's TED mod kit installed?Some more feed back. I was driving my car Saturday it was 94 degrees ambient and with the heat index 105 degrees outside. I had the A/C on panel and floor temp setting LO the seat back stayed cool the whole time. It wasn't as cool as the seat bottom but I could definitely feel the coolness on my back. This was during several drives a 30 minute drive about noon then an hour drive home mid afternoon. While driving home in the afternoon I placed my hand under the front of the seat cushion up high and I could feel the warm exhaust from the under seat TED. I think I am going to try and move the seat back intakes down closer to the floor to see if it improves its cooling ability. There is a lip under the front of the seat and I could feel the warm air just sitting in the channel there.
Also I tried to get some passenger side pics but they didn't turn out real well. There is more stuff under the passenger seat with the addition of a weight sensor for the air bag it is a tighter fit to route the hoses.
@Darko66 Might want to add this to the instructions. When attaching the hoses to the front of the seat frame you want to have the seat folded full forward so as not to stretch/stress the hoses when the seat folds forward. This will leave a little slack under the seat when the seat is in the normal upright position.
Sponsored