SolarFlare
Well-Known Member
Where do you get the low performance expectations from?
Sponsored
Where do you get the low performance expectations from?
ProCharger stage 2 costs what it costs cause its worth it!A centri kit is much simpler: PD kit replaces the whole im, fuel rails, tb, adds water cooled/pump, twin screws tolerances...
Honestly, I find it absurd that a stage 2, black painted procharger can be so close in price to a whipple stage 2 or vmp odin complete kit.
In my opinion this ess kit is not priced too low, its just priced right.
I dont think that is a good indicator of low performance at all. Its a configurable kit if you wanna make all the power it seems possible to do. their g3 blower with the billet impeller looks like it would easily push 1k horsepower. on their own site they recommend it if going for over 900hp. but they also sell pullies for as little as 7psi of boost obviously if you're only pushing 7psi you will be walked by someone running 10 psi but you chose that. pulley your Procharger to 7psi you're prob gonna lose some races too
Did they give you a delivery date? I just ordered mine and AJ was telling me it’s gonna be 2 weeks.Just ordered an ESS Mustang S550 GT G2 Tuner Kit. 4450$ shipped to my house after veteran discount, it's nice they offer that saved me 250$. Will post install pics later.
They have not. They just told me each kit is custom made.... who knows how long it will takeDid they give you a delivery date? I just ordered mine and AJ was telling me it’s gonna be 2 weeks.
Think you'll be the first one. Good luck man! Post up numbers if you get a chance at some point.I order a ESS G3 Kit today with 115 mm Pulley (8psi) together with the Injectors and BAP for my 2018 GT350R (40miles on it) I hope it was the right decision But the Price with import and taxes to Germany was unbeatable!!! When you want I can load pictures here from the Kit and installation!!!
The kit will be installed with following mods
MMR Intake Manifold
AFS ported throttle body
Corsa Performance Headers and X-Pipe
ESS G3 Kit w injectors and BAP
what do you guys think, how much power i can make it with this config??? Anybody run a ESS on a 350??
Seba
i will do... I let you now when I was on the Dyno... they tell me they need 4-6 weeks for delivery to Germany!!!Think you'll be the first one. Good luck man! Post up numbers if you get a chance at some point.
I’m pretty sure it is the same. They are big but not very good and take up the whole front end. I purchased another brand intercooler for a lot less that is a good amount smaller and iat’s are lowerNot sure but looking at pics it seems closer to the stage 2 IC
BAP at minimum but you will probably want new injectors. All depends on what your goals are. Fuel systems can take you even higher or have headroom to grow later.looking at these kits and they don't have any updates included for the fueling. Just curious if anyone knows what they recommend? I've sent an email off to inquire. I don't know much about what's required to run a blower on these cars, I assume the stock fuel system is going to need some updates?