There are many, if you dare:What vendors for 130-160 dollars please?
Yeah under 2018 up it does not pull the 11-17 header product.
Did the o2 extensions require "splicing". The website says MAY be required. I'm not a fan of "splicing".The headers are on, engine mounts on, starter is in, battery is back in, and almost done.
The only issue I’m having is the exhaust.
I have BBK off road midpipes and a Steeda x-pipe. I cut about 2” off the BBK midpipes where they meet the X-pipe and about an inch off the muffler side of it, but the x-pipe is still too long. I feel that if I keep cutting, I’ll run in to a bend and won’t be able to bolt things together.
My second issue is that the steering shaft rubs against the driver side header. I have wacked it with a hammer, but it doesn’t seem to be denting.
Any advice?
Make no mistake, it can be loud af.After reading these do seem very very tempting and if I found them correctly the price still is not bad at all....my question is...what if I want to go catted? Has anyone ran these headers with cats if so what did you get parts wise or what does anyone recommend?
https://www.ebay.com/itm/2015-2019-Mustang-GT-5-0-GT350-2M-Fabrication-Catless-Long-Tube-Headers-1-7-8/183794159189?fits=Year:2017|Model:Mustang|Submodel:GT&hash=item2acafc4e55:g:SDkAAOSwzINa7nAP
All I see is off-road versions is there any that are catted? I mean I like loud shit but I dunno is it too obnoxiously loud running off-road/catless?
Mine did not...however mine is a 16. I thought that i had read there is difference between the extensions for 15-17 vs 18-up.Did the o2 extensions require "splicing". The website says MAY be required. I'm not a fan of "splicing".
I don't think the 2m offer a cat version. But they would probably be high flow cats and not do much to quiet it.I see is off-road versions is there any that are catted? I mean I like loud shit but I dunno is it too obnoxiously loud running off-road/catless?
I disconnected the front O2 sensors, cut the wires, and soldered in extra wire to extend it.Did the o2 extensions require "splicing". The website says MAY be required. I'm not a fan of "splicing".
To be honest dude with the amount of time and work it is to install headers id go with a proven brand. With headers what you pay for is the collector... A good merge collector is really expensive and that what sets the good stuff from the junk.So I know there's a thread out there on maximizer headers..
Anyone have experience with these?
https://www.ebay.ca/itm/2015-2017-M...ash=item2aaa587fd7:g:SDkAAOSwzINa7nAP&vxp=mtr
These are crazy cheap.. Look like good quality in the pics. Stainless steel as well and lifetime warranty
In terms of the price.. They are relatively on par.
If you manually get headers made, they're probably around this price, including fab, material, etc.
When you buy some of the bigger brands, you pay for the name sometimes lol
Edit: These are also Made in USA. Not any China garbage!