BOOM! MAP Billet Intake Manifold and Port Injection ready Rail!!!

[MAPerformance]

Take a look here! :eyebulge: :eyebulge:

https://www.maperformance.com/produ...ifold-2015-ford-ecoboost-mustang-map-evox-bic

The fuel system is coming out shortly to match, but more beans to be spilled. This WILL allow complete use of E85 through the use of this, along with a much increased intake plenum size. Contact me for a special introductory price and get this on your EcoBeast!

Features:

• 4 port injection that sprays in to the intake port NOT at the floor of the the port like other kits
• Fits injectors from 48mm tall to 60mmx12mm diameter
• Increased plenum volume (4.5 liter)
• Can be used with stock throttle body or lager v6 throttle body tuning required
• Velocity stacks
• Better cylinder head flange entry angle
• 3/4/5 bar map sensor previsions
• Extra boost/vacuum ports
• Includes -6 fuel rail, rail mounts and drivers side intercooler pipe
• Billet!!!!

[email protected] 651.348.8811 Ext. 100.

-Adam

Sponsored

 

[Weather Man]

Now if Livernois would get off their ass and get the new head out!

Looking great guys!

 

[NightParade]

Beautiful and nice option to run aux fuel setup... wooo
Looking forward to installed pics!

 

[apx632]

I'm sure this isn't something that will be recommended for stock turbo cars, so I guess I'll ask this...what would be the MINIMUM turbo that this would really be good to use in combination with?

 

[Bennington]

I got scared for a minute when I saw the Boom. Very nice piece.

 

[Dirtleg]

Of all the parts that have come out for the EB in the last 18+ months I believe this is the one I like the most. I'm sure there are gains to be had. I've got no doubt it'll handle way more boost that the stock plastic piece. Those are good things. But mostly it is a beautiful piece of artwork and I'd almost be as happy hanging it on a wall as installing it on my engine.

Very nice work MAP.:cheers:

 

[svoman]

What RPM range is this designed for?

 

[stanglife]

Now make a dual plenum version for the GT350 - and we're talking!

 

[2016Mustang]

Beautiful looking piece, What benefits will I see from this intake manifold ?

 

[VargasTurboTech]

Take a look here! :eyebulge: :eyebulge:

https://www.maperformance.com/produ...ifold-2015-ford-ecoboost-mustang-map-evox-bic

The fuel system is coming out shortly to match, but more beans to be spilled. This WILL allow complete use of E85 through the use of this, along with a much increased intake plenum size. Contact me for a special introductory price and get this on your EcoBeast!

Features:

• 4 port injection that sprays in to the intake port NOT at the floor of the the port like other kits
• Fits injectors from 48mm tall to 60mmx12mm diameter
• Increased plenum volume (4.5 liter)
• Can be used with stock throttle body or lager v6 throttle body tuning required
• Velocity stacks
• Better cylinder head flange entry angle
• 3/4/5 bar map sensor previsions
• Extra boost/vacuum ports
• Includes -6 fuel rail, rail mounts and drivers side intercooler pipe
• Billet!!!!

[email protected] 651.348.8811 Ext. 100.

-Adam

Some serious hardware for the EBM guys. Very nice work MAP!

 

[TOP GEAR SOLUTIONS]

Of all the parts that have come out for the EB in the last 18+ months I believe this is the one I like the most. I'm sure there are gains to be had. I've got no doubt it'll handle way more boost that the stock plastic piece. Those are good things. But mostly it is a beautiful piece of artwork and I'd almost be as happy hanging it on a wall as installing it on my engine.

Very nice work MAP.:cheers:

I agree. It is nice to see this platform developing further and further. Nice work MAP! Looking forward to seeing some testing done with it :clap2:

 

[MAPerformance]

Beautiful and nice option to run aux fuel setup... wooo
Looking forward to installed pics!

I have some lurking on our test car, and when the bay is cleaned up, we'll get it rocking and rolling with video, testing, and glamour shots.

I'm sure this isn't something that will be recommended for stock turbo cars, so I guess I'll ask this...what would be the MINIMUM turbo that this would really be good to use in combination with?

Essentially a stock turbo car wouldn't make the best gains per dollar but we knew that, and I think the starting turbo size for reasonable benefits for dollar might be a in the range of a 55-58mm turbo.

Of all the parts that have come out for the EB in the last 18+ months I believe this is the one I like the most. I'm sure there are gains to be had. I've got no doubt it'll handle way more boost that the stock plastic piece. Those are good things. But mostly it is a beautiful piece of artwork and I'd almost be as happy hanging it on a wall as installing it on my engine.

Very nice work MAP.:cheers:

Thank you! :cheers: I plan on a wall mounted version as well

What RPM range is this designed for?

So far, stock range has proven successful, and revving further to the 8K range has also been fruitful.More testing to come!

Beautiful looking piece, What benefits will I see from this intake manifold ?

Without being too ambiguous, this will allow the capacity for virtually unlimited fueling capacity in conjunction with the stock fuel injection. It will also give massive flow and velocity rates for the larger turbos. This should also improve throttle response and in boost control regardless of it's surrounding counter parts.

Some serious hardware for the EBM guys. Very nice work MAP!

Thank you!

I agree. It is nice to see this platform developing further and further. Nice work MAP! Looking forward to seeing some testing done with it :clap2:

Sorry for the hiatus or sorts from the publicity side of things, but we're still hard at work here. Can't wait to bring some results to the table.

Now make a dual plenum version for the GT350 - and we're talking!

just kidding haha :ford: I think it'd be badass :ford:


-Adam

 

[VargasTurboTech]

I agree. It is nice to see this platform developing further and further. Nice work MAP! Looking forward to seeing some testing done with it :clap2:

I didn't know you guys were doing EBM stuff. What's up Jeff! :clap2:

 

[Tb8983]

And the question we are all wanting to know. How Much $$$$$

 

[MAPerformance]

And the question we are all wanting to know. How Much $$$$$

https://www.maperformance.com/produ...ifold-2015-ford-ecoboost-mustang-map-evox-bic

PM me for a special starting price

Sponsored