beef cake Paxton special numbers??

[OXFORDS550GT]

What psi are you seeing?

Those fuckers told me they don't read psi so I have no idea. Should be 10 pounds I think with the 3.6 pulley

Sponsored

 

[z06psi]

I don't think the 2200 and the D1SC are quite comparable though but the r.p.m. is probably the main reason.

 

[OXFORDS550GT]

I don't think the 2200 and the D1SC are quite comparable though but the r.p.m. is probably the main reason.

I figure they were close enough if I'm not mistaken the d1sc is 1400 cfm and the 2200sl is 1450 cfm

 

[beefcake]

they are pretty close

 

[zaquhree]

Looks like a leaky bov or boost leak...car could be pulling timing. Look at your logs and you'll see a trend around the dip

 

[OXFORDS550GT]

Looks like a leaky bov or boost leak...car could be pulling timing. Look at your logs and you'll see a trend around the dip

When I floor it vacuum goes to zero Immediately. What's a good indication of leaky bov or boost leak? I'm looking at my logs I'm getting -3.998 on the knock sensor from 6900-7800. What sensor do I look at to see if it's pulling timing ?

 

[beefcake]

looks like where they let off the throttle

 

[OXFORDS550GT]

looks like where they let off the throttle

Those were logs I did on the road. I didn't have the opportunity to log it at the dyno

 

[beefcake]

i'm talking about the dyno, hard to say without the boost,

 

[zaquhree]

i'm talking about the dyno, hard to say without the boost,

You think they lifted that early?

 

[beefcake]

i don't know how many they did, so it's hard to sell, when you first lift, it's still gonna be moving a tad.

i don't get too hung up on dyno's, take it to the track, that will tell the tale

 

[OXFORDS550GT]

i don't know how many they did, so it's hard to sell, when you first lift, it's still gonna be moving a tad.

i don't get too hung up on dyno's, take it to the track, that will tell the tale

He let off at 7200

 

[16MustangVet]

[MENTION=21030]OXFORDS550GT[/MENTION] damn i want to see your car on e85. your mod list is retty much exactly what i want to do. gt350 intake and na setup until i add a paxton and corn.

that combo on corn i think should be well into the 700whp range and deep 10s i hope.

 

[JohnG]

Made 680 on 93 and 747 on E85.

Paxton Beefcake Special w/ 3.6"
JLT intake
Cat deletes
RXT clutch and lightened flywheel
Aluminum DS
Fore stage 1 fuel system

 

[OXFORDS550GT]

Made 680 on 93 and 747 on E85.

Paxton Beefcake Special w/ 3.6"
JLT intake
Cat deletes
RXT clutch and lightened flywheel
Aluminum DS
Fore stage 1 fuel system

Nice numbers at what RPM are you getting those numbers for 93
Tune?

Sponsored