Base bumper rear diffuser fin upgrade..

[Joe 5.0]

What is the price for these fins?!

Sponsored

 

[V8Venom]

I am thinking of doing a carbon fiber rear decklid spoiler....though im not sure ill make any to sell ill think of some fresh ideas, and maybe have some new stuff in the coming months

Can't wait to see what you come up with. I will be interested in mostly anything you make. I posted pics of these fins in like four different places so hopefully you get more business from that. the more business you get the better for the rest of us. They are top notch quality and like I stated earlier absolutely the best bang for your buck mod that I have gotten so far.

 

[Inigo]

Will these deflect or wobble? How are they attached?

 

[fordguys550]

they are $110 shipped in the US, unpainted, or $120 painted, shipped. flat, matte. $5 extra for gloss because its a pain in the ass lol, and takes longer to get right.

they are made from fiberglass and carbon fiber, and they atatch with 3M body panel adhesive. they stick like a SOB. ive been over 120mph, freezing temps to 90 deg, and in a automatic car wash a number of times with no issues. there is no deflection ;) and they are pretty strong.

 

[GTP]

Mark me down for a gloss black set. I have enough balance in PayPal now anyway, lol. Plus they are an anti-depressant while my car is stored.

Okay, so my first question about ground clearance was answered.
Next questions -

1. Will they fit the premium bumper? If the curvature is the same on both bumpers then there should be no problem.
2. How wide are they at the base?
3. Do you provide the black sticky tape?

Thanks.

 

[fordguys550]

ive never tried them on a premium.....but yes, assuming they are the same in that area, should fit fine. they are 1/2" wide at the base, and the tape come pre applied

 

[ecobooststeven]

Im so tempted to buy these...


Sent from my iPhone using Tapatalk

 

[Midnight_LMR]

[MENTION=19057]fordguys550[/MENTION] how about a splitter? Similar to APR style but non-carbon fiber

 

[fordguys550]

i might make a splitter for myself, but man, its a lot of material.

 

[highvoltage]

I will definitely be down for some CF ones in the future!

Sent from my SM-G920V using Tapatalk

 

[Joe 5.0]

they are $110 shipped in the US, unpainted, or $120 painted, shipped. flat, matte. $5 extra for gloss because its a pain in the ass lol, and takes longer to get right.

they are made from fiberglass and carbon fiber, and they atatch with 3M body panel adhesive. they stick like a SOB. ive been over 120mph, freezing temps to 90 deg, and in a automatic car wash a number of times with no issues. there is no deflection ;) and they are pretty strong.

I think I may be interested in a set! What kind of paint do you use? I hope it is high quality paint that will not chip and peel off in a few weeks.

Also, what finish did the fins have on the Black S550 earlier in the thread (V8Venom)? They look badass!

 

[fordguys550]

im using good rattle can paint. these are well prepped. the paint isn't going anywhere.

I did the gloss black on his. I do black, and then use clear coat.

if you guys want a set, PM me. like I said, these will probably be the last few sets I make.

 

[fordguys550]

Out if the 6 sets, 1 has payed and 2 guys have their name on a set pending paynent. 3 sets left.

 

[airbornetex]

Out if the 6 sets, 1 has payed and 2 guys have their name on a set pending paynent. 3 sets left.

PM sent-

 

[fordguys550]

So 2 sets payed for, 2 sets pending. 2 left

Sponsored