VMP Vacuum Fitting

[JG15YOTE]

Can somebody tell me the exact size fitting needed for running the vacuum line to VMP blower? Running line for boost ref.

Sponsored

 

[Mootang]

1/8 NPT ..... are you running from the line from the intake hole on the passenger side?

 

[JG15YOTE]

1/8 NPT ..... are you running from the line from the intake hole on the passenger side?

Yes to the back corner of psssenger side. Thanks!

 

[Mootang]

ok, should be 1/8 NPT to the size of the hose you are using, which you have a lot of play with. I think the 1/8 hole is tapered, so don't over tighten and I used Teflon tape when I did mines.

 

[JG15YOTE]

ok, should be 1/8 NPT to the size of the hose you are using, which you have a lot of play with. I think the 1/8 hole is tapered, so don't over tighten and I used Teflon tape when I did mines.

Ok great! I’m using 5/32 vacuum line so
1/8 npt to 5/32 barb.

Sponsored