- Joined
- Dec 8, 2015
- Threads
- 237
- Messages
- 5,005
- Reaction score
- 7,512
- Location
- Sacramento, CA
- Website
- www.signaturewheel.com
- Vehicle(s)
- 2017 GT350R
- Thread starter
- #1
The Verus Engineering rear diffuser group buy is here. This was a limited production piece CFD tested by Verus and offered for all S550 Models. Fitment on the GT350 has proven to be quite beautiful as well. I was fortunate to obtain one of the last pieces available, and after much interest I have organized a group buy to get them back into production. This will likely be a one shot deal, and Verus was gracious enough to entertain it. It has been made clear that outside of this group buy the rear diffusers may not be available again anytime soon. One of those times where it is best to make a move now.
Rear diffusers are made from aluminum and matte black powder coated. GT350 models with differential coolers will need to make modifications to the Verus piece, while tech pack/GT cars can bolt right on. Diff cooler cars will need to remove your OEM rear diffuser, take off the OEM NACA duct that feeds the rear diff cooler, mock the OEM NACA ducts onto the Verus piece, cut the NACA ducts on the Verus piece, and reattach the OEM NACA ducts onto the verus piece. Installation should be achievable in a few hours time with some basic hand tools and cutting apparatus like a dremel or small jig. It’s an easy process and well worth the end result.
Trent Musser of Cortex Racing in Sonoma, California is more than happy to work with anyone that needs installation done or troubleshooting. They did a great job on mine and took 2-3 hours. Benefits of the rear diffuser, additional data, photos, and install instructions can be found on the web page for Verus below.
https://www.verus-engineering.com/product-page/s550-mustang-non-aggressive-rear-diffuser
We need a minimum of 15 paid orders to make this happen. Diffusers will take 6-8 weeks to build. Retail cost on these is 559.95 + Shipping. The group buy will remain at the retail cost of 559.95, but include free shipping which is a $70-$90 value. Applicable to the contiguous 48 states only. A 50% deposit is needed to get your name on the list and nothing happens until we get the initial 15. Group buy will run until 11/30/19. If we don’t meet the minimum then all money gets returned.
*** I spent a little time under the rear of a 2020 GT500 last week and the rear diffuser setup is the same as the GT350/R. This will work for that platform as well**
Send an email to [email protected] with the following information:
Name:
Email for PayPal Invoice:
Phone #:
Shipping Address:
1. Mark D
2. Ryan E
3. Colin K
4. Pete K
5. Chris B
6. James H
7. Ale S
8. Sohil Y
9. Byron J
10. Jessie j
11. Bill B
12. Charles S
13. Nick N
14. Nicholas G
15. David D
16. Timothy W
17. Firestarter
18. Michael M
19. Marc S
20. Richard M
21. Steve K
22. Neil G
23. Biagio C
24. Francisco F
25. Jack H
26. Bryce A
27. Joseph G
28. William D
29. Daniel L
30. Dennis H
31. Ryan M
32. Jason P
33. Amardeep B
34. Brian W
35. Jared E
36. Christopher N
37. Justin L
38. Mike W
39. Anton H
40. Surendra G
41. Scott H
Will add more photos installed on my R soon......
Rear diffusers are made from aluminum and matte black powder coated. GT350 models with differential coolers will need to make modifications to the Verus piece, while tech pack/GT cars can bolt right on. Diff cooler cars will need to remove your OEM rear diffuser, take off the OEM NACA duct that feeds the rear diff cooler, mock the OEM NACA ducts onto the Verus piece, cut the NACA ducts on the Verus piece, and reattach the OEM NACA ducts onto the verus piece. Installation should be achievable in a few hours time with some basic hand tools and cutting apparatus like a dremel or small jig. It’s an easy process and well worth the end result.
Trent Musser of Cortex Racing in Sonoma, California is more than happy to work with anyone that needs installation done or troubleshooting. They did a great job on mine and took 2-3 hours. Benefits of the rear diffuser, additional data, photos, and install instructions can be found on the web page for Verus below.
https://www.verus-engineering.com/product-page/s550-mustang-non-aggressive-rear-diffuser
We need a minimum of 15 paid orders to make this happen. Diffusers will take 6-8 weeks to build. Retail cost on these is 559.95 + Shipping. The group buy will remain at the retail cost of 559.95, but include free shipping which is a $70-$90 value. Applicable to the contiguous 48 states only. A 50% deposit is needed to get your name on the list and nothing happens until we get the initial 15. Group buy will run until 11/30/19. If we don’t meet the minimum then all money gets returned.
*** I spent a little time under the rear of a 2020 GT500 last week and the rear diffuser setup is the same as the GT350/R. This will work for that platform as well**
Send an email to [email protected] with the following information:
Name:
Email for PayPal Invoice:
Phone #:
Shipping Address:
1. Mark D
2. Ryan E
3. Colin K
4. Pete K
5. Chris B
6. James H
7. Ale S
8. Sohil Y
9. Byron J
10. Jessie j
11. Bill B
12. Charles S
13. Nick N
14. Nicholas G
15. David D
16. Timothy W
17. Firestarter
18. Michael M
19. Marc S
20. Richard M
21. Steve K
22. Neil G
23. Biagio C
24. Francisco F
25. Jack H
26. Bryce A
27. Joseph G
28. William D
29. Daniel L
30. Dennis H
31. Ryan M
32. Jason P
33. Amardeep B
34. Brian W
35. Jared E
36. Christopher N
37. Justin L
38. Mike W
39. Anton H
40. Surendra G
41. Scott H
Will add more photos installed on my R soon......
Sponsored
Last edited:
