Unknown wires

[5.0Rooster]

I have a 2016 Mustang GT that I recently picked up from auction for a little project car. Everything engine wise is in perfect shape. I couldn't help but notice some wires on the driver side in the engine bay that was just zip tied together. I do get an alert though every time that my tire pressure monitor system is not active. Can someone confirm for me that these are the tire pressure monitor wires?

Sponsored

 

[Rapid Red]

Follow them back to the fuse box. Find another 2016 look under the hood.

 

[spedy7]

Can't really tell with it still bundled up, can you pull the entire harness out or is it still clipped in within the fender? Try pulling that harness out from the rear of the fender area and separating the bundle. Referencing connector location charts, can't find anything that stands out. Judging by the 2 visible connectors, those may go to the high side a/c pressure switch/transducer and the ambient air temp sensor.

Any other noticeable issues or codes outside of TPMS issues?

 

[Magony15]

Might be for the hood mounted turn signal indicators.

 

[spedy7]

Might be for the hood mounted turn signal indicators.

Forgot about the '16s having those - with how that harness is routed near the hood hinge that's probably it.

 

[5.0Rooster]

Might be for the hood mounted turn signal indicators.

Yes it was in fact for that

 

[5.0Rooster]

Thank y'all for helping!

Sponsored