The Start...

[SlowRed]

Well I have always done a full audio system on my cars for this one I'm using alpine's KTP-445U, JL's XD600/1v2, 10W3v3 & CleanSweep from my previous builds today I just did a little mocking of the Alpine amp I think I found its home. Tomorrow I will wire and secure it if I did find the spot. The CleanSweep will be the tricky one gotta find it a home. Speakers Ill most likely go with Focal. Sorry in advance if pics are upside down I'll try to fix them

Sponsored

 

[SlowRed]

To kinda give an idea of the gap needed to make it fit you can't go all the up because of the connections for the radio and a/c can't go all the way down because of the USB and 12v Socket.

 

[SlowRed]

You might need to cut the Cloth wrap to make it fit right there's a mounting point that needs to be removed make the usb and 12v go on the bottom the other radio and a/c wires on top.

 

[SlowRed]

Here's the clip that needs to be removed from the mounting point to allow you to move the wires back towards the passengers side.

 

[SlowRed]

Wired up the amp speaker inputs and outputs. Connected the power wire for the sub amp.

 

[SlowRed]

.

 

[SlowRed]

...

Sponsored