Take off axels

[Mikeg4572]

I just picked up a set of take off axles for less than $100. Don't have anyone to share my excitement with except this group. I can't afford upgraded axels at this time. I have been talking my 6sp PP to the track and will be running drag radials. At least now I have a set of extra axles if they break. If I break my stock ones then I'll be saving for DSS 800hp ones

Sponsored

 

[Rubred50]

I just picked up a set of take off axles for less than $100. Don't have anyone to share my excitement with except this group. I can't afford upgraded axels at this time. I have been talking my 6sp PP to the track and will be running drag radials. At least now I have a set of extra axles if they break. If I break my stock ones then I'll be saving for DSS 800hp ones

Where did you find these?

 

[Mikeg4572]

eBay , got them from a shop that does performance work. These came off a new car that upgraded to aftermarket ones.

 

[Rubred50]

Ok, thanks!

 

[D3adch1ld]

Congrats on the find. I'm thinking of the same thing.

Sent from my SM-G928T using Tapatalk

 

[kcc0521]

I picked up a set of take offs on eBay for 75 bucks. They are out there if you look. I think the stickers will survive if you can keep the wheel hopping to a minimum

 

[Schu]

Raxle.com

 

[whatsup62]

Small world...I was the one that commented on your Facebook post " have you upgraded your half shafts yet". What did you end up doing for wheel and drag radial combo? Did your overall tire diameter come close?

 

[Mikeg4572]

Tire combo

I went with Nitto NTO5r 305/35/19's

 

[Mikeg4572]

Side view

So far they work great. I'm taking to the track this weekend.

 

[whatsup62]

So far they work great. I'm taking to the track this weekend.

Good luck...post up your results when back.
You purchased the 19x10's correct? Did you leave the stock PP wheels on front? where the others an exact match? Any tire bulging with the 19x10"s with that tire?
Sorry for all the questions, found out the hard way this weekend I have severe traction issues as I became very familiar with what Camaro tail lights look like. Wont happen again!

 

[Mikeg4572]

Yes , leaving the stock PP's up front. The replicas are and exact match except for the center cap which is 2.5" instead of 2.25". There is no bulging at all. They look awesome

 

[Mikeg4572]

They don't stick out at all.

 

[whatsup62]

Perfect...Thanks!

 

[Jeff_oddo]

Nice wheel and tire combo. I have the American Muscle 20" wheels with Nitto NT555. I think I'm gonna get the 305/35/20 NT05R's now! Lol

Sponsored