Gtracing2626
Member
- Joined
- Aug 21, 2019
- Threads
- 7
- Messages
- 22
- Reaction score
- 13
- Location
- Florida, USA
- First Name
- Gabriel
- Vehicle(s)
- 2016 mustang gt
- Thread starter
- #1
Hey everyone, I have a stock 2016 mustang gt front splitter, the car is the non performance pack. A few months ago I had a repair done that required removing the front bumper. I assume that they removed the front splitter in the process. Just recently I noticed that the front splitter seems a bit loose towards the middle. After inspection I noticed that 6 holes under the middle of the splitter connecting to the bumper have no screws, push pins, or anything that would hold it in place. However, there are a total of 6 screws 3 on each far side of the splitter (3 on the right near the wheel and 3 on the left near the left wheel) holding it in place. Below I've posted pictures of 2 of the 6 holes with no pins and another photograph showing all 6 holes next to each other which have nothing inside. I'm wondering if there are suppose to be screws or push pins in these spots. I've tried finding diagrams online but all I can find is pictures and forums discussing the performance pack splitter. If I'm missing something such as a pin which I believe I am, does anyone know the part number for all 6 spots. I asked a local Ford parts department and they had no idea what I was talking about. They kept giving me part numbers for the air dam, underbelly, and the bumper itself, none of which included any type of screw or pin for attachment.
Sponsored