Squaring PP tires/wheels

[Br725]

I'm sure it's been answered already, but I wasn't able to find it, so I'll ask again.
I have 275s out back 255s up front, typical PP setup on my GT. I would like to run the 9.5 inch wide rim on the front AND back, with 275's at all four corners.
Are there any issues doing this? Will I need spacers of any kind? I wouldn't think so because I'll have wider rims up front so clearance on the brembo calipers shouldn't be an issue.
Any help or information you guys can provide would be really helpful. Thanks in advance!

Sponsored

 

[GetYourWheels]

You wont have any issues at all running 19x9.5 all around with 275 square tires.
Just make sure the 9.5s will clear the GT PP brakes in front!

Heres a 19x10 F14 square setup we did with 275/40/19 PSS all around

19x10 CF10 square setup with 285/40/19 all around

 

[Need4SpeedMotors]

From my knowledge it will clear the brembo brakes and work plsu the 275/40/19 tire is a easy size to work upfront

 

[Br725]

I'm sorry, I should've been more specific. I'm planning on running the factory rear PP rims/tires on the front. Sonic have the 9.5 inch PP wheels on the rear (obviously fit) but to put the 9.5 factory pp wheel on the front, is it a clear fit as far as offset and everything goes? I don't want to buy a set and find out the contact the brembo calipers or anything.
Thanks again all!

 

[Pootie_Stang]

have you tried putting one of your rears on the front to see if it clears the brakes?

 

[Br725]

No, I haven't, I wouldn't mind but I don't quite have the back for that shit, plus I'm in Florida and a few people have contacted me with offers for the rear PP wheels that I could bring back up to GA with me in my accord. Car scene is much better in Florida than in Georgia, so parts are much more plentiful.

 

[Schu]

9.5" +52.5 PP rims will not clear front brakes... without a 5-10mm spacer.

Sponsored