Spring/Suspension Upgrades

[stangman638]

Anyone know what springs you get with the performance pack? Looking to step it up a notch and don't want to buy worse or the same springs that come with the 2019 PP..

Anyone have suggestions?

Overall, not looking to take the car on a track and run laps, but do like spirited driving and drag strip.. Kinda want something wife would be happy with too, anything that makes it a more comfortable ride..

Sponsored

 

[ponyv6]

I was planning to ask this question but, I was lazy to search to see if it was asked before. Sub'd.
I am kind of looking best lowering springs (around 0.75" or 1") for PP1 Mustang

 

[stangman638]

I think the springs on the PP1 are pretty good.. better than the base ones for sure, I just dont want to buy something that is the same exact thing I already have.

 

[BmacIL]

BMR SP763. While you're in there at least get the CB010 if not the CB005.

 

[AZ18yote]

I replaced my pp1 springs with Ford Performance ones. Maintained ride quality but with subtle drop of only 1" or so. Have BMR CB005 on order awaiting delivery as well as Bmac also mentioned.

 

[ninjacoupe]

I replaced mine with ford performance X springs. These are the street springs. Lowers the car 1 inch all around. Gives a nice noticeable improvement in handling without a drastic change in ride quality. They are a little stiffer but are a progressive spring. This along with the 25mm spacers gives a great stance with the pp1 wheels.

 

[wcharon]

I replaced mine with ford performance X springs. These are the street springs. Lowers the car 1 inch all around. Gives a nice noticeable improvement in handling without a drastic change in ride quality. They are a little stiffer but are a progressive spring. This along with the 25mm spacers gives a great stance with the pp1 wheels.

What spacer you went with. Thinking to do the same but have been reading on vibration issues.

Can you give me feedback please?

 

[AZ18yote]

What spacer you went with. Thinking to do the same but have been reading on vibration issues.

Can you give me feedback please?

I did similar before swapping out for lighter weight wheels. 1" Coyote brand in black all around on the pp1 wheels. No fitment or vibration issues personally.

 

[BmacIL]

What spacer you went with. Thinking to do the same but have been reading on vibration issues.

Can you give me feedback please?

If you go with hubcentric spacers you will not have vibration issues unless they're made terribly. Any of the reputable brands will be good.

 

[ninjacoupe]

What spacer you went with. Thinking to do the same but have been reading on vibration issues.

Can you give me feedback please?

I honestly don’t remember the brand. They are hubcentric. I torqued them to spec and then checked them again. No issues or vibration at all. Very happy with the ride and stance.

 

[wcharon]

Thanks to all for the feedback.

Sponsored